User Manual

581618 | REV. B | 11.2018
Bosch Automotive Service Solutions Inc.
HDS 200/HDS 250
HD Scan Tool for Class 4-8 Diesel, Light and Medium Vehicles
|
User guide | 23
|
en
View Data can be shown as:
• Entire Data List
• Custom Data List
Apart from Read Codes, View Data is the most useful
diagnostic function for isolating the cause of a vehicle
operation problem.
From Heavy Duty Standard menu:
1. Select View Data.
• Use the UP and DOWN keys until View
Data is highlighted.
• Press .
Heavy Duty Standard
Read Codes
View Data
Erase Codes
Record Data
Module Information
Vehicle Information
Review Data
Print Data
System Setup
2. A module menu is displayed.
• Use the UP and DOWN keys until the
designed choice is highlighted.
• Press .
• The menu is divided into two sections, a J1587
Module section and a J1939 Module section
depending on the modules supported (if avail-
able).
• The bottom line displays information for the
highlighted module: Protocol, module address
(Module Identifier=MID and Source Address =
SA) and full module description.
Select Module
J1587 MID: 128 Engine #1
Transmission
Engine #1
J1939 Modules
Engine #1
Transmission #1
J1587 Modules
All Listed Modules
3. The Scan Tool identifies available data items (PIDs
or SPNs) to view. There are two identification meth-
ods:
• The quick method: The Scan Tool can take
approximately 15 seconds to identify available
PIDs/SPNs. It may not get every or any available
PIDs/SPNs.
• The long method: The Scan Tool could take up
to 2 minutes to identify available PIDs/SPNs.
This method is more thorough and will identify
more PIDs/SPNs to view.
If you are not prompted with the following screen, then
the Scan Tool has completed identifying all PIDs/SPNs
supported using the long method.
On the Screen below, select “No” to perform the quick
methor or select “Yes” to perform the long method.
View Data
Discover More SPNs?
This may take several minutes.
No
Yes
4. Observe while the scan tool validates PID MAP.
• PID MAP validation is the tool asking the vehicle
which PIDs are supported. Refer to “9
Appendix B—Glossary” on page 45 for abbre-
viations.
View Entire List
View Entire List shows all supported PID data for the
vehicle being tested.
From Select Data to View menu:
1. Select Entire Data List.
• Use the UP and DOWN keys until Entire
Data List is highlighted.
• Press .
Select Data to View
Entire Data List
Custom Data List
Long PID/SPN Names
English/Metric
2. View PIDs on scan tool.
• Use the UP and DOWN keys.
• Refer to “9 Appendix B—Glossary” on page
45.
Eng ECU Temp(°F)
Est Perc Fan Spd(%)
EGR Valve #1 Pos(%)
PctAccelPedalPos3(%)
Throt Pos (%)
Eng Intercool Temp(°F)
Road Spd (mph)
Pct Eng Load (%)
Eng Clnt Temp(°F)
Brake Sys AirPressEmg
67.50
29.60
37.50
15.20
31.20
86.00
34.01
45.50
86.00
ON
ENGINE ECU TEMPERATURE
Brake Sys AirPressPri
Brake Sys AirPressSec OFF
OFF
If Long PID/SPN Names is turned ON, the expanded text
for the PID will scroll on the bottom line of display. Refer
to “Long PID/SPN Names” on page 13.
If the icon displays while a PID is selected, press
to select PIDs to graph. A maximum of 2 PIDs can
be graphed.