User Manual

581618 | REV. B | 11.2018
Bosch Automotive Service Solutions Inc.
HDS 200/HDS 250
HD Scan Tool for Class 4-8 Diesel, Light and Medium Vehicles
|
User guide | 39
|
en
• Press .
4. Return to HD OBD menu or Global Automotive
OBDII menu.
• Press .
6.13 Vehicle Information
The Vehicle Information function allows the scan tool to
request the vehicle’s VIN number, calibration ID(s) which
identifies software version in vehicle control module(s),
calibration verification numbers (CVN(s)) and in-use
performance tracking.
• Vehicle Information function applies to model year
2000 and newer OBD II compliant vehicles.
• The scan tool cannot verify if data is correct for
scanned vehicles.
• CVNs are calculated values required by OBD II regu-
lations.
• The CVN calculation may take several minutes.
• CVNs are reported to determine if emission-related
calibrations have been changed. Multiple CVNs may
be reported for a control module.
• In-use performance tracking tracks performance of
key I/M Monitors.
From HD OBD menu or Global Automotive OBDII menu:
1. Select Vehicle Information.
• Use the UP and DOWN keys until Vehicle
Information is highlighted.
• Press .
Global Automotive OBDII
O2 Monitor Tests
Vehicle Information
Diagnostic Monitor Tests
Review Data
On-Board Systems
Modules Present
Print Data
System Setup
Drive Cycle Monitor
Vehicle Information
Press ENTER to continue
Verify key ON
Engine OFF.
Please Wait
Communicating with the
vehicle
WORKING
Vehicle Information
Press BACK to exit
Retrieving VIN data. It may
take up to 1.5 minutes.
Vehicle Information
Press BACK to exit
Retrieving CVN data. It may
take up to 1.5 minutes.
Vehicle Information
Press BACK to exit
Retrieving CALID data. It may
take up to 1.5 minutes.
Vehicle Information
Press BACK to exit
Retrieving IPT data. It may
take up to 1.5 minutes.
2. Select information to view from the menu.
• Use the UP and DOWN keys until desired
selection is highlighted.
• Press .