User Manual
Table Of Contents
- 1 Safety Precautions
- 1.1 Read All Instructions
- 2 Important Safety Warnings and Instructions
- 3 Getting Started
- 4 Using the Scan Tool
- 5 Heavy Duty Standard Diagnostics
- 6 OBD II Diagnostics
- 7 Troubleshooting
- 8 Appendix A—Global OBD II PID Definitions
- 9 Appendix B—Glossary
- 10 Third Party Licenses
- 11 Limited Warranty
en
|
40
|
User guide
| HDS 200/HDS 250
HD Scan Tool for Class 4-8 Diesel, Light and Medium Vehicles
581618 | REV. B | 11.2018
Bosch Automotive Service Solutions Inc.
Vehicle Information
VIN
CVN
CAL ID
IPT
• If the selected menu item has data for more
than one module, a menu listing all modules
returning data for that menu item is shown.
3. View information supported by vehicle.
• Use the UP and DOWN keys (if required).
VIN (MOD $09)
1HGCM56866A018504
CVN (MOD $09)
00 5C 02 52
CAL ID (MOD $ 09)
37805-RAD-A590
--------------
IPT (MOD $ 09)
OBDCOND
IGNCNTR
CATCOMP1
CATCOND1
CATCOMP2
CATCOND2
O2SCOMP1
O2SCOND1
0
0
0
0
0
0
0
0
Monitor Conditions Encountered
• In the above examples, Module $09 returned
data. Scroll down to view information. CVNs are
shown as hexadecimal numbers.
• Abbreviations and names for in-use performance
tracking data supported by the Tool are shown
below. Not all data is supported by all vehicles.
Abbrevi-
ated Name
Expanded Name
In-Use Perf
Tracking
In-Use Performance Tracking
OBDCOND
OBD Monitoring Conditions Encountered
Counts
IGNCNTR Ignition Counter
CATCOMPX
Catalyst Monitor Completion Counts
Bank x
CATCONDX
Catalyst Monitor Conditions Encountered
Counts Bank x
O2SCOMPX
O2 Sensor Monitor Completion Counts
Bank x
O2SCONDX
O2 Sensor Conditions Encountered
Counts Bank x
EGRCOMP
EGR Monitor Completion Condition
Counts
EGRCOND
EGR Monitor Conditions Encountered
Counts
AIRCOMP
AIR Monitor Completion Condition
Counts (Secondary Air)
AIRCOND
AIR Monitor Conditions Encountered
Counts (Secondary Air)
EVAPCOMP
EVAP Monitor Completion Condition
Counts
EVAPCOND
EVAP Monitor Conditions Encountered
Counts
• If message INVALID displays on screen, the data
returned from the vehicle is incorrect, or is not
formatted in accordance with OBD II specifica-
tions.
4. Return to Vehicle Information menu.
• Press .
5. Return to HD OBD menu or Global Automotive
OBDII menu.
• Press .
6.14 Modules Present
The scan tool identifies the module IDs and communica-
tion type for all Global OBD II modules in the vehicle.
From the HD OBD menu or Global Automotive OBDII
menu:
1. Select Modules Present.
• Use the UP and DOWN keys until Modules
Present is highlighted.
• Press .