Quick Reference Guide J^mnkg Zgd @h 1.
Bosch has been delivering hot water to Australian and New Zealand households for over 50 years. Manufacturing continuous flow water heaters since the 1930’s, Bosch has secured a name synonymous with quality and innovation that continues to drive the company today. The Bosch mission is to deliver the most reliable and efficient hot water appliances to fit the lifestyles of today’s modern households. As a result, Bosch now offers the largest range of continuous flow gas hot water systems on the market.
Contents 1 Bosch continuous flow gas hot water systems p4 1.1 Range overview p4 1.2 Technical specifications p5 1.2.1 Electronic gas hot water systems p5 1.2.2 HydroPower gas hot water systems p 11 1.2.3 Pilot gas hot water systems p 13 2 Commercial gas hot water systems p 14 2.1 32 Series – commercial applications p 14 2.2 Professional Packs p 15 2.3 Manifolding options p 16 2.
1 Bosch continuous flow gas hot water systems 1.1 Range overview All Bosch hot water systems are continuous flow gas hot water systems, which means they only heat the required water on demand. They are wallhung, easy to install and much smaller than conventional storage systems.
1.2 Technical specifications 1.2.1 Electronic gas hot water systems Highflow range Models Part number 50°C limited (MP52)* Ignition type Flow rate L/min (25°C rise) Flow rate L/min (50°C rise) Mj/h Star rating Antifrost Installation Air supply / exhaust Gas type Gas supply pressure (kPa) Min. inlet water pressure for max. flow (kPa) Max. allowable inlet water pressure (kPa) Min flow rate (L/min) Electricity * 50°C limited Highflow models only available in Australia.
Connection dimensions – View from the top Connection dimensions – View from the top 17e & 21e 26e ?Zl8\hgg^\mbhg8J¥ ?Zl8\hgg^\mbhg8J¥ Gnme^m¦pZm^k8\hgg^\mbhg8J¥ Gnme^m¦pZm^k8\hgg^\mbhg8J¥ Hhp^k8\Z[e^8bgmZdbg`8ahe^ Age^m¦pZm^k8\hgg^\mbhg8J¥ Hhp^k8\Z[e^8bgmZdbg`8ahe^ Age^m¦pZm^k8\hgg^\mbhg8J¥ Product diagram 17e & 21e ª ^«8 ª^« 9bk¦bge^m :hmmhf8h_8\Zl^ ∼ :hmmhf8h_8\Zl^
Product diagram Brick opening dimensions (mm)* Recess boxes for Highflow series 17e & 21e – RBHF50L (Australia only) Kb]^ ob^p Height 930 Width 345 Depth 145 *Minimum dimensions ff 26e – RBHF26L (Australia only) >khgm ob^p Dh\dbg`8[kZ\d^m8k^fhoZ[e^ Lhi ff ;ehl^]8ob^p Ehngmbg`8[kZ\d^m lihm8p^e]^] :Z\d8h_8k^\^ll8[hq Kihm8p^e]^] ff hnmlb]^ ff bglb]^ Ehngmbg` [kZ\d^m ff bglb]^ ff hnmlb]^ Gi^g ob^p Ehngmbg` [kZ\d^m ®= = Lhi8ob^p ff lehm _hk8mhi8[kZ\d^m
Product diagram Brick opening dimensions (mm)* Fully enclosed recess box >khgm8ob^p Kb]^8ob^p RBHF304WDA (New Zealand only) Height Width 980 405 Depth 205 (if fully recessed) *Minimum dimensions ff ff ff The all new Highflow range represents the technological pinnacle of water heating. The new electronic series lets you enjoy uncompromised quality, higher capacities and even more temperature controllers.
32 Series (for large homes and commercial applications) Models Part number Ignition type Flow rate L/min (25°C rise) Flow rate L/min (50°C rise) Gas input - low (Mj/h) Gas input - high (Mj/h) Star rating Antifrost Installation Air supply / exhaust Gas type Gas supply pressure (kPa) * Internal installations require flueing as per AS 5601 / NZ 5621. Flue size: 100 mm. Flue kits available for 32 Series. For more information, please see page 17. Min. inlet water pressure for max.
Connection dimensions – View from the top KM3211WH KM3211WHQ (Bosch 32) Connection dimensions – View from the top ?9K8AFD=L88J¥ (Bosch 32Q) ?9K8AFD=L8J¥ @GL8O9L=J8GMLD=L8 @GL8O9L=J8J=LMJF J¥ @GL8O9L=J8GMLD=L8J¥ 8J¥ ;GD<8O9L=J8AFD=L8J¥ ;GD<8O9L=J8AFD=L =D=;LJA;8OAJ=8AFD=L 8J¥ =D=;LJA;8OAJ=8AFD=L Product diagram* KM3211WH & KM3211WHQ =P@9MKL8HAH=8;GFF=;LAGF GH=J9LAGF8D9EH
1.2.2 HydroPower gas hot water systems 1.1 External HydroPower range Models Part number Ignition type Flow rate L/min (25°C rise) Flow rate L/min (50°C rise) Mj/h Star rating Installation Air supply/ exhaust Gas type Gas supply pressure (kPa) * An exogel valve is recommended for areas that drop to 0°C for short periods. In areas prone to extended periods of frost and sub-zero temperatures, only Internal HydroPower models, external Highflow models and 32 Series models are suitable. Min.
Internal HydroPower range Models Part number Ignition type Flow rate L/min (25°C rise) Flow rate L/min (50°C rise) Mj/h Star rating Installation Air supply/ exhaust Gas Type Gas supply pressure (kPa) * Internal installations require flueing as per AS 5601 respectively NZ 5621. Min. water pressure for Max. flow (kPa) Max. allowable inlet water pressure (kPa) Min.
1.2.3 Pilot gas hot water systems* Models Part number Ignition type Flow rate L/min (25°C rise) Flow rate L/min (50°C rise) Mj/h Star rating Installation Air supply/ exhaust Gas type Gas supply pressure (kPa) Min. water pressure for max. flow (kPa) * Pilot range is not available in New Zealand. ** An exogel valve is recommended for areas that drop to 0°C for short periods.
2 Commercial gas hot water systems 2.1 32 Series – commercial applications Benefits of the 32 Series for commercial applications u T he 32 Series is designed specifically for commercial use. Product diagram A flow rate of 32 litres per minute at a 25°C temperature N^gm \Zi rise makes the 32 Series a true commercial hot water system. Agm^kgZe8infi u T he 32 Series has a coated copper heat exchanger to prevent corrosion and deterioration.
2.2 Professional Packs Professional Packs are specifically designed for commercial use. They are suitable for applications that require a large volume of hot water for peak demand. All Bosch Professional Packs come with the following components – Bosch hot water system, Bosch-Everlast stainless steel storage tank, built-in thermostat, shroud, PTR valve and pump. They are pre-assembled, ready to be installed and will be shipped directly to site. This means an easy installation and low set-up costs.
2.3 Manifolding options Manifold 2 to 6 units Bosch 32 models (KM3211WHNG/LP) have the ability to be Product diagram linked in series (manifolded). For 2 units, the quick connection cable (KMQC0703339) can be used to allow the N^gmbeZmbhg _en^ units to share the work load. 3 to 6 units can be used in Fh CEK; Fh Fh rotation with a fully electronic rotation manifold system controller (KMSC201).
2.4 Commercial flueing accessories All internal gas water heaters must be flued in Flueing Accessories accordance with AS 5601 or NZ 5621. For the Bosch 32 Series there is a horizontal or vertical flue kit available @hkbshgmZe8>en^8Cbm ª>C@DLJ«² for internal installations. N^kmb\Ze8>en^8Cbm ª>CNDLJ« The maximum flue length for a vertical flue with 1 elbow >e^qb[e^8>en^ >e^qb[e^8>en^ is 13m. FKH32LTR u1 00mm gas cowl (requires vent cap u1 .
4 Quick installation tips The installation tips provided in this quick refererence guide are a guide only. Please refer to the latest AS 5601 or NZ 5621 edition and local authority guidelines. Bosch gas hot water systems are to be installed by an authorised person only. u S elect the water heater that best suits the customer‘s needs. u C heck cold water pressures to ensure they are within the min/max range required.
5 Installation regulations 1.1 The installation regulations provided in this quick reference guide are a guide only. Please refer to the latest AS 5601/NZ 5621 edition and local authority guidelines. 5.1 Minimum clearance of flue terminals Natural draft Fan assisted Bosch hot water systems with natural draft flue terminals Hot water systems with fan assisted flue terminals in the are: External and Internal HydroPower ranges as well as the Bosch product range are: Highflow range and Bosch 32 Series.
Item a b c d e f g From any other flue terminal, cowl, or combustion air intake* j Horizontally from an opening window, door, non-mechanical air inlet.
6 Temperature controllers for Highflow and 32 Series Bosch recommends the installation of temperature controllers with the Highflow range and the 32 Series. Fault codes displayed on the controller make fault diagnosis as easy as possible. They also allow temperature control accurate to the single degree. 6.1 Highflow temperature controllers Two different types of Highflow temperature controllers are If several controllers are used, Bosch recommends a parallel available: Standard* and Premium.
7 Frequently asked questions (FAQs) u Are water flow restrictors compatible with Bosch hot 32 Series. However, maximum temperatures can be water systems? increased up to 75°C (Highflow range) and 83°C (32 Series), Yes, but they must allow a minimum flow rate of 9 litres if necessary. We recommend that the maximum temperature per minute. should only be adjusted by an authorised person. Please refer to the installation and operation manual.
8 Contact 1.1 Our hot water systems are designed for long life and high performance. However, if a problem does arise, our expert customer service team and network of authorised service agents in Australia and New Zealand will be ready to assist you. 8.1 Bosch Thermotechnology Australia Customer Contact Centre: Mailing address: Internet: Hotline: 1300 30 70 37 Robert Bosch (Australia) Pty. Ltd. www.bosch.com.au Fax: 1300 30 70 38 Thermotechnology, Technical Department hot.water@au.bosch.
Fh Fh Fh Fh @h 9 9 =qm^kgZe infi NZeo^ EiZ Robert Bosch (Australia) Pty. Ltd. 1555 Centre Road @hm8Gnm @hm8J^mnkg 9 NZeo^ 9 EiZ 9 9 9 NZeo^ D¥fbg NZeo^ D¥fbg NZeo^ D¥fbg Clayton Victoria 3168 Phone: (03) 9541 5555 Fax: (03) 9541 5595 Sales Hotline: 1300 30 70 37 Sales Fax: 1300 30 70 38 www.bosch.com.au www.bosch.co.