OBJ_DOKU-27534-001.fm Page 1 Thursday, July 28, 2011 11:18 AM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany PHO 2-82 www.bosch-pt.com 1 619 929 K00 (2011.
OBJ_BUCH-1529-001.book Page 2 Thursday, July 28, 2011 11:20 AM 2| 6 7 5 4 3 2 1 9 3 8 PHO 2-82 1 619 929 K00 | (28.7.
OBJ_BUCH-1529-001.book Page 3 Thursday, July 28, 2011 11:20 AM |3 A B 10 1 11 13 14 15 12 16 C D 6 mm max. 23 mm min. 18 17 E 20 16 17 15 16 15 F 11 19 Bosch Power Tools 1 619 929 K00 | (28.7.
OBJ_BUCH-1529-001.book Page 4 Thursday, July 28, 2011 11:20 AM 4| G H 1 8 21 45° I 9 mm max m mx 82 ma 2 1 619 929 K00 | (28.7.
OBJ_BUCH-1529-001.book Page 5 Thursday, July 28, 2011 11:20 AM English | 5 English Safety Notes General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.
OBJ_BUCH-1529-001.book Page 6 Thursday, July 28, 2011 11:20 AM 6 | English Planer Safety Rules Product Features f Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface leading to possible loss of control and serious injury. f Hold the power tool by insulated gripping surfaces only, because the cutter may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
OBJ_BUCH-1529-001.book Page 7 Thursday, July 28, 2011 11:20 AM English | 7 Planer Blade Selection Dust/Chip Extraction When replacing planer blades, always replace both blades; otherwise an imbalance can generate vibrations, which can reduce the service life of the power tool. f Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health.
OBJ_BUCH-1529-001.book Page 8 Thursday, July 28, 2011 11:20 AM 8 | English f Apply the machine to the workpiece only when switched on. Otherwise there is danger of kickback when the cutting tool jams in the workpiece. Switch the machine on and guide the machine with even feed over the surface to be planed. To achieve high-grade surfaces, work only with low feed and apply pressure on the centre of the planer base plate. When machining hard materials (e.g.
OBJ_BUCH-1529-001.book Page 9 Thursday, July 28, 2011 11:20 AM English | 9 Republic of South Africa Customer service Hotline: +27 (011) 6 51 96 00 Gauteng – BSC Service Centre 35 Roper Street, New Centre Johannesburg Tel.: +27 (011) 4 93 93 75 Fax: +27 (011) 4 93 01 26 E-Mail: bsctools@icon.co.za KZN – BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: +27 (031) 7 01 21 20 Fax: +27 (031) 7 01 24 46 E-Mail: bsc.dur@za.bosch.
OBJ_DOKU-27536-002.fm Page 10 Monday, August 1, 2011 7:42 AM 10 | 1 619 PA2 313 1 619 929 K00 | (1.8.