Operator`s manual

41
Performing Gene Scanning Analysis
To rename groups:
On the Groups tab in the Results table, you can change the name associated with each vari-
ant/genotype group.
You can edit group names for groups generated by Auto Group analysis or generated
by Comn/Vars analysis, not for groups based on in-run melting standards. Further,
you cannot change the names of the Negative and Unknown groups or the number of
group boxes that are displayed.
�
On the Groups tab, double-click the field for the group name you want to
change.
�
Type a new name in the field. The new name is immediately shown on both the
Sample Selector and the Results table.
■
To change variant/genotype calls:
If you believe the software has assigned a sample to the wrong group, you can manually
change the assigned group by using the New Call option.
�
In the Results table, select the samples to be changed. For details see the
LightCycler
®
480 Instrument Operator’s Manual, section “Working with Samples in the
Analysis”.
�
From the New Call drop-down list below the chart area, select a new group name
(genotype, Unknown, or Negative).
�
Click the Apply button.
► ► ►