Use and Care Manual

ManualsBrandsBosch ManualsAir ConditionersIDS 5-Ton 17.5 SEER Heat Pump Air Handler Unit

Bosch BVA Series Air Handler

2-3-4-5 Ton Capacity

R410A

Product Speciﬁ cations

Summary of content (12 pages)

PAGE 1
Bosch BVA Series Air Handler 2-3-4-5 Ton Capacity R410A Product Specifications
PAGE 2
| Bosch IDS BVA Data subject to change Product Speciﬁcations 12.2016 | Bosch Thermotechnology Corp.
PAGE 3
Product Speciﬁcations Bosch IDS BVA | 3 Table of Contents 1 Product features 4 2 Nomenclature 5 3 Product specifications 6 4 Dimensions 7 5 Blower Data 8 6 Heater Kit Data 9 Bosch Thermotechnology Corp. | 12.
PAGE 4
| Bosch IDS BVA 1 Product features  Multi-speed ECM blower motor.  Factory-installed TXV metering.  Multi-position Installation - upflow or horizontal right standard; field convertible to horizontal left or downflow.  Multiple electrical entry locations.  Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.  Dual front panel design for ease of maintenance.  Blower and coil easy slide out for ease of maintenance.  Fully-insulated cabinet design.
PAGE 5
Product Speciﬁcations 2 Bosch IDS BVA | 5 Nomenclature B V A – 24 W N1 – M 18 Efficiency 18: 18 SEER Power Supply M: 208/230V 1Ph, 60Hz Refrigerant N1: R410A Function Type W: Wired Controller Nominal Capacity 24: 24×1,000BTU/H [2 nominal tons refrigeration] Series A: A Series Unit Type V: Vertical Air Handler Bosch Figure 1 Bosch Thermotechnology Corp. | 12.
PAGE 6
| Bosch IDS BVA 3 Product Speciﬁcations Product specifications BVA-24WN1-M18 BVA-36WN1-M18[B] BVA-48WN1-M18 BVA-60WN1-M18 Nominal Cooling (BTU/h) 24,000 34,600 47,000 57,000 Nominal Heating (BTU/h) 24,000 33,600 46,500 55,000 10⅝" 11" 11" 11" 8" 10⅝" 10⅝" 10⅝" Horsepower (HP) 1/3 1/2 3/4 3/4 Full Load Amps 2.8 4.1 6.0 6.0 Liquid Line Size (“O.D.) ⅜" ⅜" ⅜" ⅜" Suction Line Size (“O.D.) ¾" ¾" ⅞" ⅞" Liquid Line Size (“O.D.) ⅜" ⅜" ⅜" ⅜" Suction Line Size (“O.D.
PAGE 7
Product Speciﬁcations 4 Bosch IDS BVA | 7 Dimensions NOTE: 25” CLEARANCE IS REQUIRED IN THE FRONT OF THE UNIT FOR FILTER AND COIL MAINTENANCE.
PAGE 8
| Bosch IDS BVA 5 Product Speciﬁcations Blower Data Airflow performance Airﬂow performance data is based on cooling performance with a coil and no ﬁlter in place. Check the performance table for appropriate unit size selection. External static pressure should stay within the minimum and maximum limits shown in the table below in order to ensure proper operation of both cooling, heating, and electric heating operation.
PAGE 9
Product Speciﬁcations 6 Bosch IDS BVA | 9 Heater Kit Data Heat Kit Model Air Handler Model (kW)Electric Heat MIN. Circuit Ampacity (Amps) 240 VAC WEHK05A 208 VAC MAX.Fuse or Breaker (HACR) Ampacity (Amps) 240 VAC Fan speed 208 VAC 1 2 3 4 5 5 28.5 24.9 30 25 ● ● ● ● ● 7.5 41.5 36.3 45 40 χ χ ● ● ● 10 54.5 47.6 60 50 χ χ ● ● ● WEHK05A 5 29.7 26.2 30 30 ● ● ● ● ● WEHK08A 7.5 42.7 37.
PAGE 10
1 0 | Bosch IDS BVA Data subject to change Product Speciﬁcations 12.2016 | Bosch Thermotechnology Corp.
PAGE 11
Product Speciﬁcations Bosch Thermotechnology Corp. | 12.
PAGE 12
United States and Canada Bosch Thermotechnology Corp. 50 Wentworth Avenue Londonderry, NH 03053 Tel: 866-642-3198 Fax: 954-776-5529 www.boschheatingandcooling.com BTC 761701104 D / 12.