Home Connect

7
Step 2.2: Manually connecting your home appliance
to your home network (Wi-Fi)
During manual connection, your home appliance sets up its own Wi-Fi network (access point) which you can log into using your
smartphone or tablet.
Press and hold the Remote start button for 3 seconds.
Aut (connect automatically) will appear on the display.
Turn the cycle selector to position 2.
SAP (connect manually) will appear on the display panel.
Press the Start/Pause button to start the connection process.
Your home appliance has now set up its own Wi-Fi network (SSID) HomeConnect for data transfer, which you can access using
your smartphone or tablet.
To nd this, go to the general settings menu on your smartphone or tablet and open up the Wi-Fi settings.
Err appears on the display. Your home appliance was unable to set up a Wi-Fi network within 5 minutes.
If the appliance is not operated for a prolonged period of time, the menu closes automatically. Start again with point
?
A
en-us_PLC_Wascher_P_UL_control_BO_9001293507.indd 7 21.06.17 06:41