Installation Guide

6
|
Bosch Climate 5000 Series Multi Zone Ductless Air Conditioner / Heat Pump Installation Manual
05.2019 | Bosch Thermotechnology Corp.
Data subject to change
2 Components
The air conditioning / heat pump system installation requires the following
components. Use all of the installation parts and components to install the air
conditioner. Improper installation may result in water leakage, electrical shock and
fi re, or equipment failure.
Name Quanity
Drain joint 1
Seal ring 1
Connecting pipe assembly
Liquid side
Φ6.35 (1/4 in)
Parts not included.
Piping kits are available
as an accessory.
Φ9.52 (3/8 in)
Gas side
Φ9.52 (3/8 in)
Φ12.7 (1/2 in)
Φ 16 (5/8 in)
Multi-zone installation manual 1
Transfer connector
NOTE: Pipe sizes may vary between air handler and condensing section connections. To meet diff erent pipe size requirements,
it may be necessary to install an adapter (transfer connector) on the outdoor unit connection.
Not included, but may be
required - 1 per indoor unit
Magnetic ring (Hitch on the connective cable between the indoor unit and outdoor unit after installation.)
Not included, but
recommended to use
1 per cable.
Power cable for connection with external power supply
Not included (see section 9
for cable requirements)
Table 1