Use and Care Manual

| 9
User Manual
Bosch Climate 5000 Series Wall Mounted Ductless Split Air Conditioner / Heat Pump (06.2022)
3 Manual Operation (Without Remote)
3.1 How to Operate Your Unit Without the Remote Control
In the event that your remote control fails to work, your unit can be operated
manually with the MANUAL CONTROL button located on the indoor unit. Note that
manual operation is not a long-term solution, and that operating the unit with your
remote control is strongly recommended.
Unit must be turned off before manual operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of the unit.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO
mode. In this mode, the unit will keep running with the temperature set point
fi xed at 75°F (24°C).
4. Press the MANUAL CONTROL button again to activate FORCED COOLING
mode. In this mode, the unit will stay at the forced cooling mode for 30
minutes and change to the force auto mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off .
6. Close the front panel.
NOTICE:
 The manual button is intended for testing purposes and
emergency operation only. Please do not use this function
unless the remote is lost and it is absolutely necessary. To
restore regular operation, use the remote control to activate
the unit.
Figure 4
Manual control button