User Manual

26 27
5.4 Configuration of the 360°-Indoor Camera
How to configure the Indoor Camera:
please start the app and login with
your Bosch account or register, if you
do not yet have a Bosch account. In the
Bosch Smart Camera App overview
screen, please select “Add Camera”.
Follow the steps indicated in the app.
Once you have completed all the
necessary entries, the app generates
a QR code. Hold it approx. 10 - 20 cm
away from the camera lens.
When the camera recognized the QR
code, you will hear a beep. The camera
now begins its initialisation routine
during which the LED ring will change
to different colours. At the end of the
routine it will light up blue for approx.
1 min and the camera is displayed in
the app. It is now ready for use.
Please don’t close or
switch the app during
commissioning.
To configure the 360°-Indoor
Camera you need to make
sure your phone is connected
to the same Wi-fi network you
want to connect the device
to. If your router support two
frequency bands (2.4 GHz and
5 GHz), select the 2.4 GHz
band with your smart phone.
The LED ring always flashes blue
while you are streaming videos.
LED ring