User Manual

28 29
7.0 360°-INDOOR CAMERA OPERATION6.0 ERROR AND ERROR RESOLUTIONS
More detailed information, like how to reset your camera
to factory defaults, you can find in the online FAQs at
www.bosch-smarthome.com/faq
The camera is operated and controlled
via the Bosch Smart Camera App.
More details on all functionality and
option you can find in the online FAQs
at www.bosch-smarthome.com/faq
Tap the camera head twice to easily
switch the camera on and off without
the app, the camera head then ex-
tends or retracts again.
2x tab
Error Error indicator Measure
LED off
during initial
configuration
LED off
Please check the power supply connection
to your camera.
After configuration the LED is off during
normal operation if the camera does not
transmit video.
Generic
boot error
LED blinks red
Power off your camera, wait 30 seconds and
then power up again.
Connection to
Wi-fi failed
LED blinks
alternating
red and green
Check the strength of the Wi-fi signal
(on the camera and on your smartphone).
Check in your router whether DHCP is active
and connecting new devices is allowed
(MAC address filter).
Tap previous in the app, re-enter the
Wi-fi password, create new QR code and
show QR code to the camera.
If this error is observed with a camera
which was previously working normally,
check your Wi-fi router.
Connection to
cloud service
failed
LED blinks
alternating
red and blue
Check the internet connection
of your router.