Installation Instructions

AMC UL2 Housing | en 7
Bosch Security Systems Assembly Instruction F.01U.029.481 | V.2 | 2006.08
b. Additional to the data lines (pin 3 and 6) connect the
power supply (pin 1 and 2), too.
11. Cable D:
If this cable is not pre-installed on grounding point 1, use
the cable D from the accessories kit.
a. Connect D1 to grounding post 1.
b. Connect D2 to the grounding post on the cover.
12. Install the fuse.
13. Close the cover.
i
NOTE!
Connect the readers and other peripheral devices as described
in the AMC Installation Manual (P/N: F01U.028.713). Route the
device cables through the knock-outs in the top an right side
wall of the housing, or through the rear of the housing.