Users Manual
> (GLW 0RGHO 391-1 @
ROUTE CALCULATION AND VISUAL GUIDANCE
PV1NJN1-1302203A-3BB3-4E27-A68F-EB2EC58942E3
Symptom Possible cause Possible solution
Waypoints are not included in
the auto reroute calculation.
Waypoints that have been already passed are not included
in the auto reroute calculation.
To go to that waypoint again, edit the route.
Route information is not dis-
played.
Route calculation has not yet been performed. Set the destination and perform route calcu-
lation.
The vehicle is not on the suggested route. Drive on the suggested route.
Route guidance is turned off. Turn on route guidance.
Route information is not provided for certain types of
roads.
This is not a malfunction.
The auto reroute calculation (or
detour calculation) suggests the
same route as the one pre-
viously suggested.
Route calculations took priority conditions into consid-
eration, but the same route was calculated.
This is not a malfunction.
A waypoint cannot be added. Twenty waypoints are already set on the route, including
ones that the vehicle has already passed.
A maximum of 20 waypoints can be set on the
route. To go to 21 or more waypoints, perform
route calculations multiple times as neces-
sary.
The suggested route is not dis-
played.
Roads near the destination cannot be calculated. Reset the destination to a main or ordinary
road, and recalculate the route.
The starting point and destination are too close. Set a more distant destination.
The starting point and destination are too far away. Divide the trip by selecting one or two
intermediate destinations, and perform route
calculations multiple times.
There are time restricted roads (by the day of the week, by
time) near the current vehicle location or destination.
Select [Do Not Use Restriction Info] in the
[Time Restricted Roads] setting.
“Route Preference” (page 6-16)
A part of the route is not dis-
played.
The suggested route includes narrow streets. This is not a malfunction.
8. Troubleshooting guide
&RQGLWLRQ
8-21