Installation Manual
Table Of Contents
- Title Page
- Table of Contents
- Safety Instructions
- Important Information
- Introduction
- Installing
- Operating
- Technical Data
- Appendices
- Index
- Back Page
Connecting Analog Input Devices
The AMC2-16IOE has 16 analog inputs, for example, for
potential-free lock mechanisms, or to detect whether a lock is
closed or open. The inputs will be connected to the 2-pin
pluggable screw connectors: - refer to Connecting Diagrams,
page 46.
The AMC2-8IOE has the connectors S2 - 5 and S10 - 13, only.
Notice!
Risk of damage to equipment
Do not connect external power supply to the AMC2 inputs.
When connecting a relay output to an AMC2 input use dry mode
with potential-free contact - refer to Connecting Relay Outputs,
page 33.
Figure 4.15: Location of the analog input connectors
4.10
38 en | Installing AMC2 Extensions
2013-08 | AMC2-16IOE | Bosch Sicherheitssysteme GmbH