Operation Manual

English - 5

17 • F016 L70 375 • TMS • 21.10.05

Stop, remove plug from the power sup-

ply and disconnect from water supply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as loose

fixings, and worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the pressure washer should happen to fail despite

the care taken in manufacture and testing, repair

should be carried out by an authorised service agent

for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Expose the strainer 18 in the machine water inlet

connection by removing the inlet connector 16.

The strainer 18 can be easily removed with long

nose pliers. Rinse and replace. If damaged replace.

Never use the pressure washer without the strainer

or a damaged strainer.

To move the machine use the top handle and roll the

machine on the wheels.

To transport the unit up or down steps or over obsta-

cles, it must be lifted by the top handle.

If the unit is to be stored or transported horizontally

the detergent tank should be drained first.

Clean the exterior of the machine thoroughly using a

soft brush or cloth. Do not use water, solvents or pol-

ishes. Remove all debris, especially from the venti-

lation slots.

Frost will damage a pressure washer that has not

been completely emptied of water. The machine

should be stored in a frost free room.

Do not place other objects on top of the machine.

Ensure cables are not trapped when storing. Do not

kink high pressure hose.

Maintenance

Cleaning/inspecting the strainer

Transport

After use storage

F016 L70 375 - GB Seite 5 Montag, 14. November 2005 1:15 13