Installation Manual
Table Of Contents
- Table of Contents
- 1 Safety precautions
- 2 Basics of fingerprint recognition
- 3 How to place a finger
- 4 Product Contents
- 5 Description
- 6 Product Dimension
- 7 Cables and Connectors
- 8 Installation of Wall-mount Bracket
- 9 Connections
- 10 Network Default Setting
- 11 Installation References
- 12 Electrical Specification
- 13 Troubleshooting
- 14 Device Cleaning
- 15 FCC Rules
- 16 Specifications
20 en | Connections BioEntry Plus
| V 1.1 | 2010.10 Installation manual Bosch Access Systems GmbH
Ethernet Connection directly with PC
To connect BioEntry Plus with a PC directly, connect both
devices with a straight CAT-5 cable. As the BioEntry Plus
supports auto MDI/MDIX feature, it is not necessary to use a
crossover type cable.
9.3 RS485 Connections
RS485 Connection for Host Communication
1 = Only the devices at the both ends of the bus should be
terminated. To enable termination on the RS232-485
converter, refer to the converter’s manual.
2 = Disable termination.
3 = The stubs should be as short as practical.