F016L70 457.book Seite 1 Montag, 18.
F016L70 457.book Seite 166 Montag, 18. Dezember 2006 9:45 09 F 016 800 178 F 016 800 177 (ART 23/2300 EASYTRIM ACCU) 24x 3 • F016 L70 457 • 06.
F016L70 457.book Seite 2 Montag, 18. Dezember 2006 9:45 09 360° 14 1 2 9 3 4 10 5 11 12 6 13 7 8 4 • F016 L70 457 • 06.
F016L70 457.book Seite 3 Montag, 18. Dezember 2006 9:45 09 A B 4 8 5 CLICK ! ➋ ➊ 6 CLICK! D C 15 CLICK ! 16 17 5 • F016 L70 457 • 06.
F016L70 457.book Seite 1 Montag, 18. Dezember 2006 9:45 09 Safety Notes Warning! Read these instructions carefully, be familiar with the controls and the proper use of the trimmer. Please keep the instructions safe for later use. Explanation of symbols on the trimmer General hazard safety alert. Read instruction manual. Wear eye protection. 360° Beware of thrown or flying objects to bystanders. Keep bystanders a safe distance away from the machine.
F016L70 457.book Seite 2 Montag, 18. Dezember 2006 9:45 09 Product Specification Trimmer ART 23 EASYTRIM ACCU/ ART 26 EASYTRIM ACCU/ ART 2300 EASYTRIM ACCU ART 2600 EASYTRIM ACCU Part number (typ) 3 600 H78 H.. 3 600 H78 J.. No-load speed [rpm] 9 500 9 000 Cutting circle [cm] 23 26 Weight (without optional extras) [kg] 1.9 2.0 Serial Number See serial No 14 (rating plate) on machine. Battery type NiMH NiMH Battery order number 2 607 335 699 2 607 335 699 Battery Voltage [V] 14.4 14.
F016L70 457.book Seite 3 Montag, 18. Dezember 2006 9:45 09 B Mounting the Cutting Guard Place the cutting guard 8 on the trimmer head 6. For Your Safety Warning! Switch off, remove battery from machine before adjusting or cleaning. The blade continues to rotate for a few seconds after the trimmer is switched off. Caution – do not touch rotating blade.
F016L70 457.book Seite 4 Montag, 18. Dezember 2006 9:45 09 Maintenance After Trimming/Storage Before any work on the machine itself, remove battery from machine. Note: To ensure long and reliable service, carry out the following maintenance regularly. Regularly check for obvious defects such as loose fixings, and worn or damaged components. Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs before using.
F016L70 457.book Seite 5 Montag, 18. Dezember 2006 9:45 09 Fault Finding The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact your service agent. Warning: Switch off and remove battery before investigating fault.
F016L70 457.book Seite 6 Montag, 18. Dezember 2006 9:45 09 Disposal Product, accessories and packaging should be sorted for environmentally-friendly recycling. Only for EC countries: Do not dispose of the product into household waste! According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation into national law, products that are no longer suitable for use must be separately collected and sent for recovery in an environmentally-friendly manner.