Installation Manual
Table Of Contents
- Title Page
- Table of Contents
- System Overview
- General
- Installation
- Requirements
- Beginning the Installation
- Language Selection and Preparing
- License Agreement
- Customer Information
- Choosing the type of Installation.
- Choosing the installation path
- Choosing Components
- Selecting supported languages
- Default configuration language (server only)
- Confirming Choices
- Setup Status
- Installation completed
- Product usage
- Deinstallation - Reinstallation
- User rights
- Back Page
Parameter Default
value
Description
Show welcome/
leaving
message
activated Given appropriate reader type
and settings (Arriving, Leaving
or Check ok in the Entrances
dialog) the reader will display
those welcome and leaving
texts which are stored for the
cardholder in the Personnel
Data dialog of the Personnel
Management application.
Does not apply to Wiegand
readers.
Show
cardholder
name in display
aktiviert Readers with display will show
the Display Name as stored in
the cardholder's Personnel
Data.
Does not apply to Wiegand
readers.
Number of
digits
4 Determines the number of
digits a verification or arming
PIN requires.
This setting applies also to the
door PIN which can be set
during the configuration of
entrances.
Possible values: 4 to 8
24 en | General Access PE 3.0
2014-06 | 3.0 | Installation Manual Bosach Access Systems GmbH