Installation Manual
Table Of Contents
- Title Page
- Table of Contents
- System Overview
- General
- Installation
- Requirements
- Beginning the Installation
- Language Selection and Preparing
- License Agreement
- Customer Information
- Choosing the type of Installation.
- Choosing the installation path
- Choosing Components
- Selecting supported languages
- Default configuration language (server only)
- Confirming Choices
- Setup Status
- Installation completed
- Product usage
- Deinstallation - Reinstallation
- User rights
- Back Page
– In addition the automatic transfer of personnel data via
Connection to the LAC Server is also checked. This box
should always remain checked.
– The display of card information during card assignment can
be disabled here. This display is only necessary when,
contrary to default settings (see General Settings in Access
PE Configurator) card data are required which do not
conform to the company standard settings.
Enrollment via AMC connected readers
Make sure that at least one reader is configured with a Door
Model 06c, which is the door model for enrollment.
Start the Configuration Browser and select a Local Access
Controller (LAC) (e.g. AMC2…)
2.9.1
Access PE 3.0 General | en 37
Bosach Access Systems GmbH 2014-06 | 3.0 | Installation Manual