Installation Manual
Table Of Contents
- Title Page
- Table of Contents
- System Overview
- General
- Installation
- Requirements
- Beginning the Installation
- Language Selection and Preparing
- License Agreement
- Customer Information
- Choosing the type of Installation.
- Choosing the installation path
- Choosing Components
- Selecting supported languages
- Default configuration language (server only)
- Confirming Choices
- Setup Status
- Installation completed
- Product usage
- Deinstallation - Reinstallation
- User rights
- Back Page
Choosing Components
According to the default settings all components are installed on
the server. By clearing the relevant check-box you can exclude
individual components from the installation.
The following components are available:
Personnel Management
Installs the dialogs for Personnel Administration.
Log Viewer
Installs the application for log book evaluation including a link
on the desktop and in the Personnel Management dialog.
Configurator
Installs the Configurator program, for setting up devices and
systems, with a link on the desktop and in the Personnel
Management dialog. These components should be installed at
least on the server. They can however be executed from any
client.
Card Personalization
Installs the Card Personalization application in the CP folder.
Functions for card processing (e.g. importing pictures, printing
receipts) can only be executed if the badge designer program is
installed and running.
Notice!
It is recommended that you install all components on the
server, so that in the case of network problems between Server
and Clients there is always one computer from which these
tasks can be performed.
3.8
Access PE 3.0 Installation | en 53
Bosach Access Systems GmbH 2014-06 | 3.0 | Installation Manual