Installation Manual
Table Of Contents
- Title Page
- Table of Contents
- System Overview
- General
- Installation
- Requirements
- Beginning the Installation
- Language Selection and Preparing
- License Agreement
- Customer Information
- Choosing the type of Installation.
- Choosing the installation path
- Choosing Components
- Selecting supported languages
- Default configuration language (server only)
- Confirming Choices
- Setup Status
- Installation completed
- Product usage
- Deinstallation - Reinstallation
- User rights
- Back Page
Product usage
At the time of installation, default and sample data was also
created for Access PE; this can help when you are setting up the
system. This preinstalled data makes it possible for a user to log
on and make changes.
Nevertheless, it is necessary to configure a few settings before
you can use the system in the way and to the extent you require.
The following sections describe the details regarding the
definitive implementation.
Licensing
Once you have installed the Access PE software, you will only
have limited access to the applications until you activate your
licenses. Installation enables Access PE components to be used
in demo mode. In addition to the standard components
(Personnel Management, Configurator and Logviewer), this
includes the release of the following facilities:
–
– 1 workstation
– 400 cards
– 2 AMCs
– 8 readers
– 2 cameras
In order to operate and use the software according to the scope
of your order, you must activate the licenses you have
purchased.
4
4.1
Access PE 3.0 Product usage | en 61
Bosach Access Systems GmbH 2014-06 | 3.0 | Installation Manual