Installation instructions

en-us
12
8. Put the base panel back in place and secure it with
the 3 screws.
Note:
Due to its own weight or when the door is filled with
foodstuffs, it is possible that the fridge compartment
door leans even when the appliance is standing up
vertically. The door gap at the top and at the bottom is
not identical.
If the door gap at the top and at the bottom is not
identical:
1. Unscrew 2 screws and remove the top hinged
cover.
2. Slacken the hinge screw.
Do not unscrew the screw completely!
3. Adjust the fridge compartment door‘s vertical
alignment.
4. Tighten the hinge screw.
5. Apply the hinged cover and fasten with 2 screws.
Fitting the doors
If the appliance is too big to fit through the doors of
your home, the door handles or the appliance doors
can be unscrewed.
Note:
The door handles or the appliance doors may only be
removed by an Authorized Service technician. Your
local Customer Support center will advise you of the
cost.
: WARNING
Risk of electric shock!
Disconnect the appliance from the electricity mains
before removing the top hinged cover.