Installation Sheet

en-us
23
Note:
The filter cartridge must be tightened by hand so that
no leaks are created and that the appliance is correctly
supplied with water.
7. Refit the lid and snap it into place.
8. Turn on the water supply to the appliance.
9. Switch on the appliance.
10.Dispense and dispose of water for five minutes via
the water dispenser.
11.Pour the water out of the old filter cartridge. The filter
cartridge can be disposed of together with the
normal household waste.
12.Press and hold the "Light/Filter" button for
3 seconds. That resets the water filter indicator. The
symbol will then stop flashing. The new filter has
now been activated.
Note:
The ice and water dispenser can also be used without
a water filter. In that case, fit the cover cap.
Cover caps can be obtained from customer service.
Performance Data Sheet
NSF System Trade name: WFS200MF & WFS210MF
NSF Replacement Cartridge No: WFC100MF (for WFS200MF) & WFC110MF (for WFS210MF)
This system has been tested according to NSF/ANSI 42, 53, 401 for reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration less than
or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42, 53, 401.
System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401
for the reduction of the claims listed below.
Substance Influent challenge
concentration
Average reduction Reduction
requirement
Max. permissible
product water
concentration
Chlorine taste and
odor
2.0 mg/L ± 10 % 97.2 % ≥ 50 % N/A
Chloramine 3.0 mg/L ± 10 % 97.2 % N/A 0.5 mg/L
Particulate, Class I
particles ≥0.5 to <1 μm
at least 10,000
particles/mL
>99.9 % 85 % N/A
Atrazine 0.009 mg/L ± 10 % >94.4 % N/A 0.003 mg/L