Design Guide

1–800–944–2904 | bosch-home.com/us
Planning Information | Benchmark
®
| Refrigeration | 193
Refrigeration — Benchmark
®
Built-in Refrigeration
Planning Information
Benchmark
®
Built-in Refrigeration
Planning Example #2: Standard Overlay Cabinetry
Custom
Door Panel (
3
/
4
")
Cutout Cabinet
Countertop
Min. 4"
(102 mm)
Kitchen
Cabinet
Kitchen Cabinetry
Face Frame (Visible)
Installation Cutout,
(Created by a Separate Cutout)
CUTOUT FOR 48" SIDE-BY-SIDE APPLIANCE COMBINATION, STANDARD
OVERLAY CABINETRY:
In this example, the installation cutout is formed by creating a separate cutout
around the appliances. It yields a look that deviates from the general kitchen design.
The custom door panel has a cumulative thickness of 1
1
/
2
" (38 mm),
3
/
4
"
(19 mm) emulating the face frame and
3
/
4
" (19 mm) for the actual door panel).
Thus, a 25" (635 mm) deep installation cutout is required.
– cutout width is exactly 48" (for an 18" + 30" = 48" side-by-side combination)
– cutout (case) depth is 25" (635 mm) due to 1
1
/
2
" (38 mm) custom door panel
– any furniture return must be at least 4" (102 mm) deep, on interior top and sides,
of solid material and should be finished to match the exterior at the same depth
(4" or 102 mm)
Furniture Return
Min. 4"
(102 mm)