Data Sheet

D122 Dual Battery Harness
Harness with circuit breaker. Connects two batteries
to a compatible control panel.
Order number D122
D122L Dual Battery Harness with Long Leads
Color-coded harness with circuit breaker and leads
measuring 89 cm (35 in.). Connects 12 V batteries to
compatible control panels.
Order number D122L
D126 Standby Battery (12 V, 7 Ah)
A rechargeable sealed lead‑acid power supply used as
a secondary power supply or in auxiliary or ancillary
functions.
Order number D126
D1218 Battery (12 V, 18 Ah)
A 12 V sealed lead‑acid battery for standby and
auxiliary power with two bolt‑fastened terminals.
Includes hardware for attaching battery leads or spade
connectors
Order number D1218
CX4010 Plug‑in Transformer
For use in North America. 110 VAC primary voltage
input. 18 VAC, 22 VA secondary input.
Order number CX4010
TR1850-CA Transformer
For use in Canada. Plug-in transformer with input:
120 VAC, 60 Hz, 0.50 A; output 18 VAC, 50 VA output.
Order number TR1850-CA
D8004 Transformer Enclosure
For applications such as fire alarm that might require a
transformer enclosure.
Order number D8004
B8103 Enclosure
White steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.).
Order number B8103
D8103 Enclosure
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.).
Order number D8103
D8108A Attack Resistant Enclosure
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.). UL Listed. Includes lock and
key set. B520, B4512, and B5512 require the B12
mounting plate.
Order number D8108A
D8109 Fire Enclosure
Red steel enclosure measuring 40.6 cm x 40.6 cm x 8.9
cm (16 in. x 16 in. x 3.5 in). UL Listed. Includes a lock
and key set.
Order number D8109
B10 Medium Control Panel Enclosure
White, steel enclosure. Accepts an optional lock and
tamper switch. Measures 35.6 cm x 31.8 cm x 7.6 cm
(14 in x 12.5 in x 3 in).
Order number B10
B11 Small Control Panel Enclosure
White, steel enclosure. Accepts an optional lock and
tamper switch. Measures 27.8 cm x 25.9 cm x 8.32 cm
(10.9 in x 10.2 in x 3.3 in).
Order number B11
B12 Mounting Plate for D8103 Enclosure
Required for mounting select control panels and other
devices in D8103, D8108A, D8109, or BATB Battery
Box enclosures.
Order number B12
D101 Lock and Key Set
Short-body lock set with one key supplied. Uses the
D102 (#1358) replacement key.
Order number D101
D110 Tamper Switch
Screw‑on tamper switch that fits all enclosures.
Shipped in packages of two.
Order number D110
ICP‑EZTS Dual Tamper Switch
Combination tamper switch with a wire loop for
additional tamper outputs.
Order number ICP-EZTS
RPS Kit (USB)
Account management and control panel programming
software with USB security key (dongle).
Order number D5500C-USB
Accessories
SDI2 Inovonics Interface and Receiver Kit
Kit containing B820 and EN4200 for use on SDI2 bus
panels.
Order number ENKIT-SDI2
7 | B3512 Control Panels