Installation And Use Instructions

en-us Getting to know your appliance
18
Ice maker
9 WARNING
RISK OF INJURY!
Never reach under or into the ice maker.
Notes
■ Ice cube production will start as soon as freezer
and refrigerator compartments reach the set
temperatures.
■ As soon as the appliance reaches the set
temperature, the first batch of ice cubes will be
ready in approximately 4 hours.
■ Once ready, the ice cubes are automatically
discharged into the ice cube bin.
■ Ice cube production stops automatically when the
ice cube bin is full.
■ For hygiene reasons, discard the ice cubes
produced within the first 24 hours.
Ice cube bin
9 WARNING
RISK OF INJURY!
Never reach into the dispenser opening of the
ice cube bin.
9 WARNING
RISK OF COLD BURNS!
Avoid prolonged contact between the skin and
ice or metal surfaces in the ice cube bin.
9 CAUTION
■ Damage to the appliance: Never store bottles or
food in the ice cube bin, even for short
periods. This may block and damage the ice
maker.
■ Damage to equipment: Never clean the ice cube
bin in the dishwasher.
■ When full, the ice cube bin is heavy: Pull the ice
cube bin out with both hands.
Notes
■ You can take large amounts of ice cubes directly
out of the ice cube bin or store them in the frozen
food bin (top).
■ Never put ice cubes into the ice cube bin
manually.
■ Clean the ice cube bin with lukewarm water and
wipe dry with a soft cloth so new ice cubes
cannot stick to it.
You can remove the ice cube bin:
■ Grasp the left and right-hand notch under the bin
and pull forward to remove.
You can insert the ice cube bin:
■ Position the bin in the opening and slide back
until it engages.
Notes
■ If the bin jams during insertion, remove any
excess ice from the opening.
■ During insertion, the turning position of the screw
conveyor on the bin and the opening must match
up.
■ If the bin cannot be inserted, rotate the screw
conveyor on the bin and try again.