Interactive User Manual

Basic Operation en-us
13
6.7 Flat frozen food container
Store flat frozen items, the ice storage container and the
ice scoop in the flat frozen food container.
6.8 Frozen food pull-out container
In order to achieve an improved overview and to remove
frozen food more quickly, remove the frozen food pull-out
container.
6.9 Frozen food carrying container
Store large frozen items in the frozen food carrying con-
tainer.
6.10 Butter and cheese compartment
Store butter and hard cheese in the butter and cheese
compartment.
6.11 Door rack
To adjust the door rack as required, you can remove the
door rack, and re-insert it elsewhere.
→ "Removing the door rack", Page22
6.12 Ice storage container
If ice cube production is switched on, the ice cubes are au-
tomatically stored in the ice storage container.
NOTICE:
The ice maker may become blocked or damaged by food
or objects stored in the ice storage container.
▶
Never store food or objects in the ice storage container.
6.13 Accessories
Only use original accessories. These are designed espe-
cially for your appliance.
The accessories for your appliance depend on the model.
Ethylene absorber
For important safety instructions and information about in-
stallation and use, see the enclosed installation and oper-
ating instructions for the ethylene absorber.
The ethylene absorber slows down the ripening of ethyl-
ene-sensitive fruit and vegetables to keep them fresher for
longer.
Attaching the ethylene absorber
▶
Attach the ethylene absorber in accordance with the in-
structions for installation and use for the ethylene ab-
sorber.
Using the refill set
1. Install the components of the refill set in accordance
with the instructions for installation and use for the eth-
ylene absorber.
2. Replace the bags and the timer every 6months follow-
ing activation.
Note:Refill sets consisting of bags and timer are available
from our customer service, your dealer or on our website.
Ice scoop
You can use the ice scoop to remove a portion of ice
cubes.
Basic Operation
7 Basic Operation
Basic Operation
7.1 Switching on the appliance
1. Connect the appliance to the electricity supply.
→ Page7
Note:If the appliance has been previously switched off
using the control panel, press .
a The appliance begins to cool.
2. Switch off the warning signal using .
a goes out as soon as the set temperature has
been reached.
3.
Set the required temperature. → Page13
7.2 Operating tips
¡ Once you have switched on the appliance, the set tem-
perature is only reached after several hours.
Do not put any food in the appliance until the set tem-
perature has been reached.
¡ The front and side panels of thehousing heat up occa-
sionally. This prevents condensation from forming.
¡ When you close the door, a vacuum may be created.
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
7.3 Switching off the appliance
▶
Press .
7.4 Setting the temperature unit
You can choose between the temperature setting °F and
°C.
1. Press .
2. Press .
3. Press / (Submenu setting) until the setting display
submenu shows or ⁠.
4. Press .
7.5 Setting the temperature
Setting the refrigerator compartment temperature
▶
Press / (Refrigerator compartment) repeatedly
until the temperature display (refrigerator compartment)
shows the required temperature.
The recommended temperature in the refrigerator com-
partment is 37°F (3°C).
Setting the freezer compartment temperature
▶
Press / (Freezer compartment) repeatedly until
the temperature display (freezer compartment) shows
the required temperature.
The recommended temperature in the freezer compart-
ment is 0°F (−18°C).