Installation Manual

Communication Trouble device numbers (zzzz)
Bus Keypad display # Reporting number Description
On Board Dest [1-4]
Onbrd IP
410, 420, 430, 440 Destinations 1 through 4 via On-board
Ethernet
On Board Dest [1-4]
Cell# [1-2]
418, 428, 438, 448 Destinations 1 through 4 via On-board
Cellular Module
On-Board PN Dest [1 – 16 ] 451 – 466 Personal notification destinations number
1 through 16
SDI2 Dest [1-4]
SDI2# 1
411, 421, 431, 441 Destinations 1 through 4 on SDI2
Network Module 1
SDI2 Dest [1-4]
SDI2# 2
412, 422, 432, 442 Destinations 1 through 4 on SDI2
Network Module 2
any RPS 499 Used for DNS lookup error of RPS
hostname
Special User IDs (uuuu, iiii)
To better identify the originator of some control panel events with no unique, Standard User
identified, special user IDs designate each special case. All user ID are defined in the table
below.
User ID type Keypad display Contact ID
reporting
Modem format User text
Service User 0 F00 0 “SERVICE USER”
Standard Users 1…50 001…50 1…50 {configured text}
Time Sync 5001 F01 5001 “AUTO TIME SYNC”
RPS User 5002 F02 5002/none “BY RPS”
Automation User 5003 F03 5003/none “BY AUTOMATION”
Keyswitch 5004 F04 5004 “BY KEYSWITCH”
No User Specified User not displayed 000 0xFFFF (displays blank) {no text}
Keypad alarm virtual point numbers (ppp, pppp)
Special point numbers identify the originator of manually created keypad alarm events. All
special point numbers are defined in the table below.
Notice!
The point numbers for manually created keypad alarm events are changed in control panel
firmware version 3.01.
22.2.4
22.2.5
22.2.6
162 en | Appendix Control Panel
2016.05 | 14 | F.01U.287.180 Installation and System Reference Guide Bosch Security Systems, Inc.