Installation Manual

6.2.2 Battery maintenance 32
6.2.3 Battery supervision 33
6.2.4 Battery discharge and recharge schedule 33
6.3 B520 Auxiliary Power Supply 33
6.3.1 SDI2 address settings 33
6.3.2 Supervision 34
6.3.3 Auxiliary power supply trouble conditions 34
6.3.4 Installation and control panel wiring (B520) 34
6.3.5 Powered device and battery wiring 35
7
Telephone communications 37
7.1 B430 Plug-in Telephone Communicator 37
7.1.1 Supervision 37
7.1.2 Installation and module wiring (B430) 37
7.1.3 Diagnostic LEDs 38
7.2 Phone jack location 38
7.3 Telephone line monitor 39
7.4 Called party disconnect 40
7.5 Communication failure 40
8
IP communications 41
8.1 On-board Ethernet connection 41
8.1.1 Supervision 41
8.1.2 Local RPS programming 41
8.1.3 On-board Ethernet diagnostic LEDs 42
8.2 Conettix Plug-in Cellular Communicators 43
8.2.1 Supervision 43
8.2.2 Installation and module wiring (B44x) 43
8.2.3 Signal strength and diagnostic LEDs 44
8.3 B426 Ethernet Communication Module 45
8.3.1 Address and emulation settings 45
8.3.2 Supervision 45
8.3.3 B426 module faults 46
8.3.4 Local RPS programming 46
8.3.5 Installation and control panel wiring (B426) 46
8.3.6 Diagnostic LEDs 48
8.4 B450 Conettix Plug-in Communicator Interface 49
8.4.1 SDI2 address settings 50
8.4.2 Supervision 50
8.4.3 Installation and control panel wiring (B450) 50
8.4.4 Diagnostic LEDs 51
8.5 Compatible receivers for IP communication 52
9
Keypads, keyswitches, keyfobs and transmitters 54
9.1 Keypads 54
9.1.1 B915 Basic Keypad 54
9.1.2 B920 Two-line Alphanumeric Keypad 54
9.1.3 B921C Two-line Capacitive Keypad with Inputs 54
9.1.4 B930 ATM Style Alphanumeric Keypad 54
9.1.5 B942 Touch Screen Keypad 55
9.1.6 Shortcuts and custom functions 55
9.1.7 Address settings 55
4 en | Table of Contents Control Panel
2016.05 | 14 | F.01U.287.180 Installation and System Reference Guide Bosch Security Systems, Inc.