Installation Manual

9.1.8 Supervision 55
9.1.9 Installation and control panel wiring (keypads) 55
9.1.10 Sensor loops overview and wiring (B921C/B942/B942W only) 56
9.1.11 Output wiring (B942/B942W only) 57
9.1.12 Troubleshooting 57
9.2 Keyswitches 57
9.2.1 Operation 58
9.2.2 Installation and control panel wiring (keyswitches) 58
9.3 RADION keyfobs and Inovonics pendant transmitters 59
10
On-board outputs 60
10.1 Circuit protection 60
10.2 Total available power 60
10.3 Open collector outputs 61
11
Off-board outputs 62
11.1 B308 Octo-output Module 62
11.1.1 SDI2 address settings 62
11.1.2 Supervision 62
11.1.3 Installation and control panel wiring (B308) 63
12
On-board points 64
12.1 Point sensor loops 64
12.1.1 Single EOL (and no EOL) resistor circuit style 64
12.1.2 Dual EOL resistor circuit style 65
12.2 Point response time 66
13
Off-board points 67
13.1 B208 Octo-input Module 67
13.1.1 SDI2 address settings 67
13.1.2 Supervision 67
13.1.3 Installation and control panel wiring (B208) 67
13.1.4 Sensor loops overview and wiring 68
13.2 Test off-board points 71
13.3 Extra Point events 71
13.4 Missing point conditions 71
14
Wireless modules 72
14.1 B810 receiver 72
14.1.1 SDI2 address settings 72
14.1.2 Supervision 72
14.1.3 Installation and control panel wiring (B810) 72
14.2 B820 SDI2 Inovonics Interface Module 73
14.2.1 SDI2 address settings 73
14.2.2 Supervision 73
14.2.3 Installation and control panel wiring (B820) 73
15
Access control 75
15.1 B901 75
15.1.1 Address settings 75
15.1.2 Supervision 75
15.1.3 Installation and control panel wiring (B901) 75
15.2 Card reader wiring 76
16
Program and test the control panel 77
16.1 Program the control panel 77
Control Panel Table of Contents | en 5
Bosch Security Systems, Inc. Installation and System Reference Guide 2016.05 | 14 | F.01U.287.180