Installation Instructions

1 Battery box mounting holes (5) 2 Mounting locations for optional battery
shelf
Installation
Mounting the Battery Box
Before installing the enclosure:
– Determine the total weight of the enclosure with the modules and batteries to be
installed. Choose a mounting location and surface that can support this weight, and
select appropriate mounting hardware.
– Ensure that the environmental conditions of the mounting location comply with the
technical specifications listed.
– Ensure that there is sufficient room to open the cabinet door fully, and to easily install,
wire and maintain the components within the enclosure.
Once a suitable mounting location is selected and prepared:
– Remove the door from the battery box by lifting the door up and off the hinges.
– On the mounting surface, mark the location of the three mounting holes at the top of the
battery box.
– Partially drill the marked holes in the mounting surface.
3
3.1
4 en | Safety Battery Boxes
2013.02 | 02 | F.01U.035.881 Installation Instructions Bosch Security Systems, Inc.