Bosch Connected Control BCC100 Wi-Fi Thermostat Installation Guide and User Manual T E MOS GET TH UR NEW O Y F O OUT OSTAT THERM Bosch ad The Downlo Control App d te c Conne GE 39 SEE PA FO ORE IN FOR M BoschHeatingAndCooling.
Table of Contents Installation Guide 4 6 11 20 23 25 Compatibility Thermostat Installation Initial Setup Advanced Settings Troubleshooting Wiring Diagrams BCC100 Device User Manual BCC App User Manual 31 Thermostat Main Screen 32 Icons 34 Temperature Setpoints 39 40 41 42 Thermostat Overview 35 Unit Operating Mode 35 Fan 36 Accessory 37 Additional Information BCC App App Main Screen Overview Setpoint(s) on the App Schedule Overview App Menu Overview 44 Mode 44 Device Messages 44 Temperature Addition
Meet the Bosch Connected Control (BCC100 Thermostat) The Bosch Connected Control BCC100 Thermostat is compatible with the majority of 24V heating and cooling equipment to help you save energy and money. Easily control your home's temperature from the full color 5” touchscreen display, the Bosch Connected Control smartphone app or your voice with the Bosch Connected Control Alexa Smart Home Skill and your Alexa-enabled smart devices or with Google Assistant.
Compatibility u A C-wire (common wire) is required to power the unit Two wire systems are not supported. If a C-wire is not readily available, we recommend you seek professional support from your local contractor. u The Bosch Connected Control BCC100 Wi-Fi Thermostat works with most 24V systems, including gas, oil, propane, electric, forced air, variable speed, heat pump and radiant. u For conventional (gas/oil/electric): Heat Only, Cool Only,and Combined Heat & Cool.
Installation Overview Included in the box Tools you will need u Screws (2) and Anchors (2) u Medium Phillips screwdriver (for attaching the Wall Plate to the wall) u BCC100 Wi-Fi Thermostat u Flathead Screwdriver u Wire Labels u Jumper Wire u User Guide u Customer Support Card u Smartphone (for taking pictures of the existing wiring) u Bosch Connected Control smartphone app (for configuring the thermostat settings and registering your device) Tools you may need u Needle-Nose Pliers (for pulling wires
Thermostat Installation Step 1 Step 2 Turn OFF power Turn off all power to your HVAC (Heating, Ventilation, and Air Conditioning) system by using the master equipment switch or circuit breaker box. ON OFF Remove the old thermostat from the old wall plate OLD WALL PLATE OLD THERMOSTAT Y2 W2 G L C Y R RC E AUX G OB C W Y R RC WARNING: Failure to turn off the power may result in electrical shock and/or damage to the equipment.
Step 4 Step 6 Take a picture of the existing wiring Disconnect the wires from the old thermostat and remove the wall plate using a screwdriver Make sure that you can clearly read the terminal labels and see which wires are connected to which terminals from your photo. You will need to reference this photo later during the initial setup. Note: You can also use the wire labels we have provided you to correctly label each wire based on the terminal where it is connected.
Thermostat Installation Step 9 Step 8 Drill and insert wall anchors (if necessary) Drill two 7/32” holes where you marked the location of the mounting screws and then insert the wall anchors provided into these mounting holes. Check if the wall plate is level and insert screws Make sure your new BCC100 wall plate is level and insert the included screws from the package. Mount your new wall plate to the wall using a Phillips head screw driver.
BCC100 Terminal Step 10 After all wires are securely connected, gently push any excess wires back into the hole in the wall R/RC BCC100 Terminal Key Data Not Used Fan (W2) 2nd Stage Heating2 C-wire (common) W2 AUX Step 11 Attach the BCC100 thermostat to the BCC100 wall plate 1st Stage Heating1 2nd Stage Compressor 1st Stage Compressor Reversing Valve 2nd Stage Heating Humidifier/Dehumidifier Alarm Input3 HOOK Heating Appliance Power R/RC Thermostat Power/ Cooling Appliance Power Note: The c
Thermostat Installation Step 12 Turn ON the power to your HVAC by using the master equipment switch or circuit breaker box The thermostat will power on and display a Bosch logo and loading bar. Note: After loading completes, the thermostat will display the following screen: Step 13 ON OFF Great job, the hard part’s over! Next, get your smartphone and visit your app store.
Initial Setup User Account Setup 1. After downloading the Bosch Connected Control app, open the app on your smartphone and click the Register button to create a new account. 2. Read and accept the Terms and Conditions and Privacy policy, and press continue in the top right hand corner. 3. Follow the on-screen instructions to create your account and then press OK at the bottom of the screen. 4. After a successful registration, you can use your newly created user ID and password to log into your account.
Initial Setup For a quick and easy way to begin using your new smart thermostat, the device will automatically direct you to the Initial Setup screen after you have turned it on for the first time. Unit Configuration Select your home’s heating type, stage configuration for heating and cooling, and type of accessory (humidifier or dehumidifier) if available. Select your heat type Select your Heat Type according to the heating appliance located in your home.
4. Use the Balance Point to set the outdoor temperature value the thermostat will use to switch between your heat pump and fossil fuel appliance. Above this value, your thermostat will use your heat pump to heat your home and below this value, your thermostat will use your fossil fuel heating appliance. 5. Use the Change over Delay to set the time the system will be off when changing between heat pump and fossil fuel heating sources.
Initial Setup Date & Time Follow the on-screen instructions to set the date and time of BCC100 Thermostat and then click Next Arrow at the top right corner of the screen. On Device Enter your location’s current date and time; after the device is registered or linked to a user account, the date and time on the device will automatically update to the current time associated with the user account.
Manual Entry If you are trying to connect to a hidden network, press the SSID button to bring up the SSID screen. Enter your SSID into the text box, then follow the on-screen instruction to complete the Wi-Fi setup. After you have successfully established a connection, your network name appears. If your thermostat is already registered to your account on your smart device, your User ID name appears. Follow additional instructions on the screen to complete setup.
Initial Setup For an unregistered device, click the green Registration button to register your account. If you want to register a different account to your device, you can also click the Registration button and follow the steps outlined in the App Setup section of this User Guide. Schedule Choose the schedule you would like to modify, or select No Schedule if you do not wish to set up a schedule at this time, and click the Setup button or Next arrow. Note: Home is the default schedule for your BCC100.
Note: There is a 5 degree deadband required between heating and cooling setpoints to prevent equipment from short cycling. 3. If you want to add more periods, then click add period button and repeat the above 3 steps until you have set all your periods for the day. Note: You are allowed a maximum of 8 periods per day. Vacation This schedule will be used to set your heating/cooling equipment to 2 periods with set points (1 heating and 1 cooling) that can be manually adjusted.
Initial Setup Review In the final step, the BCC100 provides a summary review of information that you have entered into the thermostat. You will be able to go back to different parts of the Initial Setup guide by pressing the different sections on the left pane or using the Previous arrow. If you have completed the review, please press the Complete button to start utilizing your BCC100! 18 Congratulations! You have finished the installation and setup of your BCC100 Thermostat.
Choose Comfort Choose Bosch! 19
Advanced Settings Advanced Settings allow HVAC professionals the ability to modify specific thermostat settings for better control of the heating and cooling appliance(s). In order to access the Advanced Settings of the BCC100 Thermostat, your thermostat must be connected to Wi-Fi. The Advanced Settings section is accessible from the Menu of the BCC100 thermostat.
Advanced Settings Heating & Cooling u To access the Heating and Cooling, select Advanced Settings from the Menu, then select Heating and Cooling. u Enter the Professional Access Code and select a parameter to modify the default value. From this menu you can adjust: Title Default Max Min Description Fan Delay On 0 Seconds 120 Seconds 0 Seconds The fan’s lag time after the heating or cooling call is initiated when in Fossil Fuel, Heat Pump, or Cooling operation.
Advanced Settings Device Log u To access the Device Log, click Log on the Advanced Settings screen and enter the Professional Access Code. u The Device Log stores up to 90 days’ worth of thermostat activity. To view historical data, select the time period you would like to view.
Troubleshooting & Frequently Asked Questions Wi-Fi Can the BCC100 be used without Wi-Fi? We strongly encourage everyone to use the Wi-Fi capabilities of the thermostat, as it will improve the user experience. However, it is functional without the use of Wi-Fi after the Initial Setup has been completed. NOTE: The Dual Fuel feature is disabled when Wi-Fi is unavailable. Dual fuel requires Wi-Fi to determine outdoor air temperature and function properly.
Troubleshooting & Frequently Asked Questions Bosch Connected Control App (Android and iOS) What is the name of the smartphone app in the App Store and Google Play Store? The name of the app is Bosch Connected Control. Bosch Control is a different Wi-Fi thermostat app used with Bosch Boilers. How many accounts can be associated with the thermostat at once? Only one account can be associated with a given thermostat.
Wiring Diagrams Single Stage Heat – Furnace Example: Bosch 80% AFUE Gas Furnace - BGS80 ▶ Ensure the system has a C-wire ▶ Ensure the pre-installed jumper wire remains between RH and RC ▶ Connect the R, C, W1 and G wires from the Furnace to R/RC, C, W/E and G terminals on the wall plate, respectively R/RC Two Stage Heat – Furnace Example: Bosch 96% AFUE Gas Furnace - BGH96 ▶ Ensure the system has a C-wire ▶ Ensure the pre-installed jumper wire remains between RH and R/RC ▶ Connect the R, C, W1, W2 and
Wiring Diagrams Single Stage Heat – Boiler Example: Bosch Greenstar Gas Condensing Boilers* ▶ Ensure the system has a C-wire ▶ Ensure the pre-installed jumper wire remains between RH and RC ▶ Remove the jumper from the thermostat connection on the boiler and connect the two terminals to RH and W/E on the thermostat. R/RC ▶ *NOTE: Bosch Greenstar boilers will require an external transformer to power the thermostat. The two power wire should connect to R/RC and C on the Thermostat.
Wiring Diagrams Heat pump systems Heat pump systems are specialty designed to be able to provide heating and cooling using a single compressor, a reversing valve, and a fan.
Wiring Diagrams Two Stage Heat Pump with One Stage Emergency Heat ▶ Ensure the system has a C-wire ▶ Ensure the pre-installed jumper wire remains between RH and R/RC ▶ Connect the R, C, W1, Y1, Y2, O/B and G wires from the heat pump to R/RC, C, W/E, Y, Y2, O/B and G terminals on the wall plate, respectively R/RC Single Stage Cool – Air Conditioner ▶ Ensure the system has a C-wire ▶ Ensure the pre-installed jumper wire remains between RH and R/RC ▶ Connect the R, C, Y1 and G wires from the Air Conditioner
Wiring Diagrams Combined Single Stage Heat Pump and Single Stage Furnace (Dual Fuel) ▶ Ensure the system has a C-wire ▶ Ensure the pre-installed jumper wire remains between RH and R/RC ▶ Connect the R, C, W1 and G wires from the Furnace to R/RC, C, W/E and G terminals on the wall plate, respectively ▶ Connect the C, Y1, G, and O/B wires from the Heat Pump to R/RC C, Y, G, and O/B terminals on the wall plate, respectively Humidifier or Dehumidifier Accessory with a Single Stage Heat Pump A single Humidif
Main Screen Main Menu System Mode Current Room Humidity Current Room Temperature Fan Status Current Schedule Wifi / Cloud Access Indicator Adjust Temperature Set-Points 31
Thermostat and App Icons Basic Icons System Modes Menu Heat Mode Auto Exit / Save Settings Cool Mode On Back Auto Mode Circulation Schedule Emergency Heat Mode Device Settings Off System Settings Advanced Setting Weather Heating Types Fossil Fuel Heat Pump Dual Fuel 32 Fan Modes Electric Accessory Humidifier Dehumidifier
Unit Operation 1 2 Heat Mode Heating on (1st stage) & (2nd stage) 1 2 Cool Mode Cooling on (1st stage) & (2nd stage) 1 2 Auto Mode Heating on (1st stage) & (2nd stage) 1 2 Auto Mode System Connectivity Schedule on Device Schedule on Cloud Wi-Fi Connection Established Wi-Fi Connection Not Established Internet is Not Available Cooling on (1st stage) & (2nd stage) Retry Internet Connection Fan on/running (Fan Auto Mode) 1 Emergency Heating 4 Auxiliary Heating Emergency heat on (1st stage) & (2
Adjusting Temperature Setpoint(s) Temporary Adjustment This feature will override the current set point in favor of the set point you enter until the next programmed time in the schedule. If you would like to permanently schedule the new set point, press the lock icon. This will permanently lock in the adjustment until the X button is pressed on the main screen.
Thermostat Overview Unit Operating Mode Heat: The thermostat cycles your heating appliance to maintain your scheduled heating set point. Cool: The thermostat cycles your cooling appliance to maintain your scheduled cooling set point. Auto: The thermostat cycles your heating/cooling appliance to maintain your scheduled heating/cooling set points. Off: The thermostat turns off all heating/cooling functions. You can still manually operate the fan in this mode.
Thermostat Overview Humidifier & Dehumidifier Operating Mode You can enable automatic humidity control if the correct humidifier or dehumidifier accessory was correctly wired and configured during the thermostat’s initial setup. Based on the setup, the thermostat turns on the humidifier during heating operation and the dehumidifier will be turned on during cooling operation.
Additional Information Weather Forecast The weather forecast is based on the location of the installed thermostat. The first time you connect your thermostat to the app, your location was assigned to the thermostat. Note: You must grant “location access” for the app to enable this feature. Screen Options There are 3 levels of screen brightness and 3 options for Screen Timeout. You can also utilize this menu to Lock the screen. A 4-digit passcode will be required to lock the screen.
ad Downlo ay! T p od BCC Ap your l all of st Contro gs. Adju in tt e stat’s s o or -g e h -t thermo on hedule acation your sc me to v o h r u o ergy n set y e e sav mode to ay.
Bosch Connected Control App The app allows you to remotely control all of your thermostat’s settings. It also allows you to adjust your schedule on-the-go or set it to vacation mode to save energy while you’re away. You can also connect an unlimited number of thermostats and manage up to 4 schedules per thermostat.
App Screen Overview Back Current Time Menu Refresh / Sync Time Thermostat Screen Lock Actual Room Relative Humidity Actual Room Temperature Hold Heating Setpoint System Mode Fan 40 Current Schedule Period Cancel Schedule Override Cooling Setpoint Accessory
Adjusting Temperature Setpoint(s) on the App No Schedule From the Main Screen, tap the current temperature and use your finger to scroll up or down to change the temperature setpoint. Stop on the value you want for your new setpoint and wait a few seconds for the setpoint to update. You will see the update reflected on the app and on the thermostat.
Schedule Overview Schedule u To add a new Schedule, use the ‘+’ button in the top right hand corner, name your schedule and click OK. u To modify an existing Schedule, select a Schedule from the list. 42 Add a New Period To add a new Period to a given day, click the Add Period button in the middle of the screen. Then individually select and set the Starting time, Heat setpoint and Cool setpoint.
Schedule Overview Delete an Existing Period To delete an existing period, swipe left on the existing period and click delete. Copy a Schedule To copy a schedule to other days of the week, click the lettered days at the bottom of the screen until all days you would like to copy in the existing schedule have turned green and click Copy Schedule. Save Schedule Use the Save button in the top right hand corner of the screen to save all changes.
App Menu Overview Mode Similar to the BCC100 Thermostat, use the Mode screens to remotely adjust the System Mode, Fan Mode and Accessory Mode. 44 Device Messages Alert messages regarding your specific thermostat can be read and deleted from this section of the app. Temperature Follow the on-screen instructions to change temperature units and set temperature alert function parameters.
“Alexa, Set My Thermostat to 72 degrees” 45
Additional Features Control Your BCC100 with Amazon Alexa Bosch offers one Smart Home Skill for integrating your BCC100 with Alexa’s voice controls. Using the Bosch Connected Control Skill from the Skills section of the Amazon Alexa App. You Can Control the BCC100 by Saying: ▶ Alexa, turn (Device Name) on. ▶ Alexa, turn (Device Name) off. ▶ Alexa, Increase (Device Name) by _ _ degrees. ▶ Alexa, Decrease (Device Name) by _ _ degrees. ▶ Alexa, Set (Device Name) to _ _ degrees.
Connecting Your BCC100 to Amazon Alexa 1. Download the BCC App, create an account, and register your app to the BCC thermostat. 2. Download the Amazon Alexa app and set up your Alexa-enabled device. 3. In the Amazon Alexa app, click on the Menu button in the top left corner. 4. Click on the Skills section and search for “Bosch Connected Control” in the search bar at the top of the page. 5. After you find and click on the Bosch Connected Control Skill, click on the blue Enable button. 6.
Additional Features Control Your BCC100 with Google Assistant Once installed and connected to the app, Bosch offers one Smart Home link for integrating your BCC100 with Google Assistant’s voice controls. After setting up your thermostat as a new device in the Google Home app: You Can Control the BCC100 by Saying: ▶ Hey Google, turn (Device Name) on. ▶ Hey Google, turn (Device Name) off. ▶ Hey Google, Increase (Device Name) by _ _ degrees. ▶ Hey Google, Decrease (Device Name) by _ _ degrees.
Connecting Your BCC100 to Google Assistant 1. Download the BCC app, create an account, and register your app to the BCC100 thermostat. You must have a registered BCC account to set up and use your thermostat with Google Assistant. 2. Download the Google Home app and set up your Google-enabled device. 3. In the Google Home app, click on the add button in the middle of the screen. 4. Click on Setup up device and select the link option under Works with Google. This is the last option on the page. 5.
Warranty MODELS COVERED This limited warranty is provided by Bosch Thermotechnology Corp. (“Bosch”) and covers the Bosch Connected Control (BCC100) Wi-Fi Thermostat (hereinafter referred to as “Product”). This warranty is provided to the original purchaser of the Product as long as the Product remains installed at its original place of installation.
Warranty LIMITED WARRANTY OTHER THAN THE OBLIGATIONS OF BOSCH EXPRESSLY SET FORTH HEREIN, BOSCH DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSCH’S SOLE OBLIGATION WITH RESPECT TO THE PRODUCT AND PURCHASER’S EXCLUSIVE REMEDIES ARE SET FORTH IN THE FOREGOING LIMITED WARRANTY.
Bosch Thermotechnology Corp. Watertown, MA • Londonderry, NH • Ft. Lauderdale, FL General Inquiries: 1-800-283-3787 www.boschheatingandcooling.com 52 76H993390F 5/20 Copyright © 2020 Bosch Thermotechnology Corp. All rights reserved. Subject to change without notice.
