Bosch Connected Control BCC100 Wi-Fi Thermostat User Guide boschheatingandcooling.
Contents Getting Started.......................2 Main Screen............................7 Starting Your System............19 Temporary Scheduling..........21 Icons.......................................8 Initialization..........................10 Wi-Fi Setup...........................14 App Setup.............................17 Programming Schedules.......22 Additional Features...............24 Advanced Features...............28 Warranty...............................
Getting Started The BCC100 thermostat is designed to work on most 24Vac low voltage heating and cooling systems such as gas and oil furnaces, heat pumps, and single or dual-stage systems. Professional installation recommended for: ▶▶ Humidifiers and dehumidifiers Turn Power Off Please turn off the unit’s main power at the circuit panel before beginning the installation process. POWER OFF WARNING: Failure to turn off power may result in electrical shock and/or system damage.
2 Mount the New Wall Plate Use the enclosed screws and anchors to mount the new wall plate. In most cases, you can utilize the same mounting position of your old thermostat. Be sure to check the alignment of your wall plate before installation. 3 Connect the New Wall Plate WARNING: Use caution when securing and routing wires to prevent possible shortage to adjacent terminals. Insert all wires vertically from the open socket into the proper terminal.
The following are wiring diagrams for common systems. If you are unsure of how to connect your thermostat, please seek professional support. Thermostat Conventional Heating (2 Stages) & Cooling (2 Stages) System with Humidifier and Single Transformer Install a jumper between Rh and Rc only if a single transformer is used for - Data G C W2 W/E Y2 Y O/B Rh H/Dh Rc heating and/or cooling.
Thermostat - Data G C W2 W/E Y2 Y O/B Rh H/Dh Rc Heat Pump 4 Heat / 2 Cool with Dehumidifier ▶▶ Connect Rc to Rh Heat Pump 3 Heat / 2 Cool ▶▶ Connect Rc to Rh ▶▶ Connect W to W2 to operate both stages of electric heat at the same time Thermostat - Data G C W2 W/E Y2 Y O/B Rh H/Dh Rc Thermostat 5 - Data G C W2 W/E Y2 Y O/B Rh H/Dh Rc Heat Pump 2 Heat / 1 Cool with Emergency Heat ▶▶ Connect Rc to Rh
4 Attach BCC100 to the Wall 1 CL IPS First align the two clips on the back of the BCC100 into the corresponding slots on the top of the wall plate. 2 Firmly press forward until you hear a click to secure the thermostat into position. PUSH Ensure the C-wire is properly connected to the heating and cooling equipment and thermostat. Switch the power back on for the heating/cooling system at the main switch box.
5 Power On and Enjoy! Your thermostat should power on and prompt you to start the setup. If you are having trouble powering the thermostat, please refer to boschheatingandcooling.com for additional support. Thank you for choosing the BCC100.
Icons Basic Icons Menu Heating Types Gas/Oil/ Propane Exit / Save Settings Heat Pump Back Electric Weather Schedule Fan Modes Device Settings Auto System Settings On Advanced Settings Circulation System Modes Humidity Heat Mode Humidifier Cool Mode Dehumidifier Auto Mode Emergency Heat Mode Off 8
Icons Unit Operation 1 2 1 2 1 2 1 2 Heating on (1st stage) & (2nd stage) - Heat Mode Cooling on (1st stage) & (2nd stage) - Cool Mode Heating on (1st stage) & (2nd stage) - Auto Mode Cooling on (1st stage) & (2nd stage)- Auto Mode Fan on/running - Fan Auto Mode 4 Emergency Heating Emergency heat on Auxiliary Heating Auxiliary heat on - 2nd Aux Stage of a 4-stage heating system System Connectivity Schedule on Device Schedule on Cloud Wi-Fi Connection Established Wi-Fi Connection Not Establishe
Initialization For a quick and easy way to begin using your new smart thermostat, the device will automatically direct you to the Initial Setup screen once it’s turned on for the first time. HEAT PUMP SYSTEM: 1. Unit Configuration Select your home’s heating type, stage configuration for heating and cooling, and type of accessory (humidifier or dehumidifier) if available.
2. Date & Time ON DEVICE: Please enter your location’s current date and time; once the device is registered or linked to a user account, the date and time on the device will automatically update to the current time associated with the user account. APP: The date and time for the device, as well as the user account, will automatically update by selecting the time zone for the device. 3.
4. Schedule Only 2 schedules (Home & Vacation) will be available during offline operation. However, this list can be expanded to up to 4 schedules when a Wi-Fi connection is established. HOME: This schedule will be utilized to set your heating and/or cooling equipment to predefined set points. The device will initially come with a factory default schedule; please adjust the schedule as necessary.
5. Review In the final step, you will be requested to review all the information that has been entered into the thermostat. You will be able to go back to different parts of the Initial Setup guide by pressing the different sections on the left pane.
Wi-Fi Setup Wi-Fi Connection SCAN | Tap the Wi-Fi icon to enter the Wi-Fi setup screen, then tap the Scan icon to list available Wi-Fi networks. Follow on-screen instructions to complete the Wi-Fi setup. Hidden Wi-Fi Connection MANUAL ENTRY | If you are trying to connect to a hidden network, press SSID button on the scan page to bring up the screen that will allow you to enter your own SSID. Follow on-screen instructions to complete the Wi-Fi setup.
The following may cause a failed connection to the device: ▶▶ Wi-Fi signal is too weak ▶▶ 5G Wi-Fi network is too weak ▶▶ SSID contains space or non-ASCII characters ▶▶ Incorrect password ▶▶ Wi-Fi is okay but your internet is unavailable ▶▶ Additional webpage authentication is required Once a connection is successfully established, an account ID will appear. This ID is for the network to which the device has been added.
Auto Reconnect If your device loses connection with your wireless network, it will automatically attempt to reconnect after 5 minutes. If that fails, it will make a new attempt every 15 minutes for the next 24 hours. Any manual network reconfiguration of the thermostat will stop automatic reconnection attempts. Wi-Fi can be manually turned off or on. Turning off your Wi-Fi will also disable the internet connection and all smart features, including App access to the device.
Members of a family need to share an account in order to gain access to the thermostat. App Setup Congratulations! You are now connected to the thermostat. Now set up your App to enjoy exciting smart features. Step 1: Download BOSCH CONNECTED CONTROL COMPATIBLE DEVICES Apple® devices running iOS 7.1 & higher Android™ devices running 4.0.3 & higher There are three ways to download the BCC100 App for your smart device: 1. Search “BCC100 App” in the App Store or Google Play Store, then download. 2.
Step 2: Create a User Account After installing the App onto your smart phone, create a user account. Step 3: Add Device to your Account Log in to your account: tap Add New Device on the device list screen, then simply follow on-screen instructions in the App to complete this task. You will be asked to enter the MAC ID and the Temporary Verification Code.
The Temporary Verification Code (TVC) is a 4-digit code randomly generated each time you enter this screen. It expires after 90 seconds, upon which a new code will be needed. Tap the Temporary Verification Code to generate a new one if the The MAC ID is a unique network ID for this device previous code expires. that helps to identify your You may utilize the When dealing with technical Embedded QR code available in the Device MacID field to automatically populate device over the internet.
Please note that your device is always running on a programmed schedule and the current operating mode is part of that schedule. Thus, when you change the Mode, it will only change the mode for the current program. If you change to a different program, your Mode will follow the new program that you have selected. You can opt to turn The mode selection is for the the System Off to current program (Home). shut down all HVAC You cannot assign different operations including modes within a program.
Temporary Scheduling Temporary Adjustment This feature will override the current set point to the desired set point until the next programmed time in the schedule. If you would like to permanently schedule the new set point press the lock icon. This will permanently lock in the adjustment until the X button is pressed on the main screen. Scheduling on the Thermostat You can override the current scheduled set-point(s) by tapping the plus or minus (+/-) icons on the right side of the screen.
Programming Schedules Programming a Schedule There are only two default schedules (Home and Vacation) available for selection when the device is offline. If the Internet connection is established, you may have up to 4 schedules. Programming with the Thermostat You can access the Schedule by following: Menu > Schedule and selecting the schedule that you would like to run. Schedule must first be selected in order to modify it. 1. Select Schedule from the list and press the Setup button 2.
Programming with the App From the main menu in the App, select Schedule. 1. Select the Mode that you would like the schedule to operate, and press Edit • If you would like to edit a different schedule please press List for a list of available schedules 2. Select the day of the week you would like to change 3. Select a period (a total of 8 are available per day) to change • Edit: Edit the current schedule • Insert: Insert a new period after the current one • Delete: Delete the current period 4.
Additional Features Weather Forecast The weather forecast is You must grant “location based on the location of access” for the app to the installed thermostat. enable this feature. The location will be assigned the first time you connect your thermostat to the app. Screen Options There are 3 levels of screen brightness and 3 options for Screen Timeout. You can also utilize this menu to Lock the screen. A 4-digit passcode will be required to lock the screen.
Unit Operating Mode Heat: Unit will be cycled to maintain scheduled heating set-point. Cool: Unit will be cycled to maintain scheduled cooling set-point. Auto: Unit will be automatically switched between heating and cooling operations to maintain heat/cool set-points. Off: All heating and cooling functions are turned off. The fan can still operate in this mode if manually activated. Emergency Heat (only available on Heat Pumps): Will turn off all compressors and turn on backup electric heat source.
Humidifier/Dehumidifier Operating Mode You may only operate in The user may select either either humidifier OR humidifier/dehumidifier as dehumidifier mode and an optional accessory if may not operate in both the wire was properly modes at the same time. installed during the initial installation process. The humidifier mode will be turned on during heating operation and dehumidifier mode will turn on during the cooling operation if the necessary humidity level is not met.
Temperature, Alerts, and Auto-On WARNING: Alerts are Alert: Send an alert message an additional source of or turn on the system protection but not the automatically when the room main source protection temperature is out of the for the system. range between set-points. Run Time The thermostat will keep track of your run time for the Heating, Cooling, Air Filter and Water Pad. You can also set a reminder for Air Filter and Water Pad according to the number of calendar days.
Advanced Features Advanced Settings is designed for HVAC professionals who want to modify advanced features for better unit control. It will also allow the user to reset the device to factory settings. Advanced Settings requires an access code.
Warranty Bosch Connected Control BCC100 Wi-Fi Thermostat Models Covered This limited warranty is provided by Bosch Thermotechnology Corp. (“Bosch”) and covers the Bosch Connected Control BCC100 Wi-Fi Thermostat (hereinafter referred to as “Product”). This warranty is provided to the original purchaser of the Product as long as the Product remains installed at its original place of installation.
10. 11. Damage caused by Product not being installed in accordance with all applicable state and local plumbing and/or building codes and regulations. Shipping charges, delivery expenses or administrative fees incurred by the purchaser in repairing or replacing the Product.
Bosch Thermotechnology Corp. Watertown, MA • Londonderry, NH • Ft. Lauderdale, FL • Williston, VT Inquiries and support: 1-800-283-3787 boschheatingandcooling.com 31 76H993390 7-17 Copyright © 2017 Bosch Thermotechnology Corp. All rights reserved. Subject to change without notice.
