Manual - BCM8450UC

15
en
Dispensing hot water
Dispensing hot water
¡
CAUTION
Risk of burns!
The beverage outlet gets very hot. After
use, always let it cool down before you
touch it.
The appliance must be ready for use.
■ Remove the milk tube from the milk
container.
■ Remove any milk or coffee residue from
the outlet.
■ Place a cup or glass underneath the
beverage outlet.
■ Turn the control ring and select
“Hotwater”.
Note:
The settings can be changed as described
in the section “Drink adjustment”.
■ Press C to start dispensing.
■ The message appears “Milk hose
separated from milk container and coffee
outlet cleaned?”.
■ If still connected, remove the milk tube
and press [ Yes ] on the display.
Hot water ows out of the beverage outlet.
Press C again to prematurely halt the
dispensing process.
Personalized drinks
Press B to open the selection for
personalized drinks.
Up to 8 storage spaces can be used. Save
your favourite drinks that are frequently
dispensed here with all their settings.
Note:
Press B to exit the menu without saving
at any time.
Entering or changing drinks
■ Press B.
The selection of memory locations appears.
■ Turn the control ring to choose an empty
memory location (empty glass) to make a
new entry, change an occupied memory
location, or delete a favourite drink.
■ Select [ new ] at an empty memory
location or [ Details ] at an occupied
memory location.
] new
MyCoffee3
The menu for adjusting the drinks opens.
The last drink dispensed is shown with the
last settings selected.
■ If you do not wish to save last drink
dispensed, turn the control ring and select
another drink.
■ Press each setting to be changed and
turn the control ring to adjust the values
as desired.
Other setting options appear depending on
the selection.
■ Press [ Further details| Save ] to enter
other settings.
Note:
For milk drinks, the mixing ratio of coffee
and milk can be set.
■ The settings can be stored under an indi-
vidual name. Press [ Name ]. The screen
for entering the name opens.
Back
to Details
Anna
m
Delete
letter
SaveName
Save
letter
■ Turn the control ring and select a letter or
a symbol.
■ Press [ Save letter ] to conrm the letter
selected or [ Delete letter ] to delete it.
■ Select other letters or symbols and
conrm.
■ With [ Save ] the entry is saved.
The selection menu opens.
■ Press B to exit the menu.