Use & Care Guide
18
en Home Connect
Temperature Format
Setting option in “°F” or “°C”.
Volume units
Setting option in “oz” or “ml”.
Switch off after
To set how long the appliance should wait
You can specify values from 15 minutes to
12 hours. The factory setting is 30 minutes.
Home Connect
Settings for connection to Wi-Fi network
Illumination
outlet. “On”, “when in use” or “Off”
selected.
Brightness illumination
Setting the illumination lightness of the
“Level 1” to “Level 10” can
Brightness display
Setting the illumination lightness of display.
Key tones
Clock
Display option for time “Off”, “Analog” (on)
or “Digital”
changed in the Clock menu option.
Note:
power switch or there is a power failure,
Time
Setting for the current time.
Clock format
Setting option in “12hr” (American mode) or
“24hr” (European mode)
Note:
Frost protection
Service program to prevent frost damage
during transportation and storage.
This program completely empties the
appliance.
Empty the water tank and reinsert.
close the door.
The appliance automatically empties all its
pipes.
Empty the drip tray and re-insert.
Beverage info
prepared since its initial use.
Factory settings
Resets your own settings to the condition
when delivered.
Press [ Reset ] or [ Do not reset ] to either
Home Connect
PC, smartphone). The Home Connect
a perfect complement to the networked
appliance.
If the appliance is not connected to a Wi-Fi
network (home network), it can still function
operated as usual via the display.
Important information:
in the 2.4 GHz frequency range. Please
check it and adjust it if necessary.
-
Connect services in your country. Home
this at www.home-connect.com.