Use & Care Guide
26
en Service programs
Descaling
Press E.
Press [ Descale ] to select the program.
The display indicates the progress
of the program.
Empty drip trays and replace.
and press C
Pour lukewarm water into the empty
00311820 in it.
Note:
If there is not enough descaling solution in
and press C again.
Remove the suction pipe from milk
container, wipe it and insert the end of the
grounds container.
Close the appliance door.
Place a container with a capacity of 17 oz
Press C. The descaling program will
Remove the container and press C.
Rinse the water tank and (if removed)
Fill the tank with fresh water up to the
Replace the water tank and close the door.
Place the container underneath the
Press C. The descaling program will
appliance.
Remove the container, empty the drip
trays, replace and close the appliance door.
Press C
descaling and is ready for use again.
Press E to exit the program.
Cleaning
Press E.
Press [ Clean ] to select the program.
The display indicates the progress
of the program.
empty the drip trays and replace.
drawer.
Close the appliance door.
Place a container with a capacity of 17 oz
Press C. The cleaning program will
Remove the container, empty the drip trays,
replace and close the appliance door.
Press C
cleaning and is ready for use again.
Press E to exit the program.
Calc‘nClean
automatically suggest this service program.
Press E.
Press [ Calc'nClean ] to select the
program.
The display indicates the progress
of the program.
empty the drip trays and replace.
drawer again.
and press C
Pour lukewarm water into the empty
00311820 in it.