Small Size LCD/LED Monitors UML-080-90 | UML-082-90 | UML-100-90 | UML-102-90 en User Manual
Small Size LCD/LED Monitors Table of Contents | en 3 Table of Contents 1 Safety 5 1.1 Important safety instructions 5 1.2 Safety precautions 8 1.3 Important notices 1.4 Customer Support and Service 15 8 2 Unpacking 17 2.1 Parts List 17 3 Exploded View 18 4 Description 21 4.1 Features 21 4.2 Power 22 5 Installing the Monitor 23 5.1 Ventilation 23 5.2 Mounting the Monitor 23 5.2.1 Desktop Installation 23 5.2.2 Wall Mount Installation 24 5.
en | Table of Contents Small Size LCD/LED Monitors 6.6 Setup Menu 34 7 Power Management 36 7.1 Power Consumption 36 7.2 LED Indicator 36 8 Troubleshooting 37 9 Maintenance 38 10 Technical Specifications 39 10.1 UML-080-90/UML-100-90 39 10.2 UML-082-90/UML-102-90 40 F.01U.134.499 | 1.0 | 2009.07 User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Safety | en 1 Safety 1.1 Important safety instructions 5 Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist flufffree cloth or leather shammy may also be used.
en | Safety Small Size LCD/LED Monitors disconnect the cable system. This will prevent damage to the unit from lightning and power line surges. 7. Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure. 8. Overloading - Do not overload outlets and extension cords.
Small Size LCD/LED Monitors Safety | en 7 personnel when any damage to the equipment has occurred, such as: – the power supply cord or plug is damaged; – exposure to moisture, water, and/or inclement weather (rain, snow, etc.
en | Safety 1.2 Small Size LCD/LED Monitors Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation.
Small Size LCD/LED Monitors Safety | en 9 Coax grounding: – Ground the cable system if connecting an outside cable system to the unit. – Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source. – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.
en | Safety Small Size LCD/LED Monitors NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostaticsensitive printed circuit boards. Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).
Small Size LCD/LED Monitors Safety | en 11 Power lines - Do not locate the display near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. Rack-mount – Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions. The equipment must not exceed its maximum operating temperature requirements.
en | Safety Small Size LCD/LED Monitors NOTICE! This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules.
Small Size LCD/LED Monitors Safety | en 13 Informations FCC et ICES (modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes : – cet appareil ne peut pas provoquer d'interférence nuisible et – cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement.
en | Safety Small Size LCD/LED Monitors Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
Small Size LCD/LED Monitors Safety | en 15 NOTE! This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.
en | Safety Small Size LCD/LED Monitors Asia Region Repair Center Telephone: 65 63522776 Fax: 65 63521776 E-mail: rmahelpdesk@sg.bosch.com Customer Service Telephone: 86 (0) 756 7633117 or 86 (0) 756 7633121 Fax: 86 (0) 756 7631710 E-mail: customer.service@cn.bosch.com Warranty and more information For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecurity.com. F.01U.134.499 | 1.0 | 2009.
Small Size LCD/LED Monitors 2 Unpacking | en 17 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service.
en | Exploded View 3 Small Size LCD/LED Monitors Exploded View Figure 3.1 Front Panel Ref. Button 1 Speaker 2 Input Description Generate sounds from the input audio signal. Selects the signal to be displayed. 3 4 Serves as the “Enter” function for OSD menus. Selects the on-screen display (OSD). Adjusts the value when in the Scrolls up in the OSD. Menu OSD. Adjusts the value when in the Scrolls down in the OSD or auto adjusts when in OSD. 6 PC mode.
Small Size LCD/LED Monitors Figure 3.2 Ref 1 2 3 4 5 6 19 Rear Panel (UML-080-90, UML-082-90) Connector Audio In (for external audio) AV1 In AV1 Out AV2 In AV2 Out VGA In Bosch Security Systems, Inc. Exploded View | en Ref 7 8 9 10 11 Connector S-Video In 12 VDC In Adjustable Stand Trigger Input RS-232 In (for firmware update) User Manual F.01U.134.499 | 1.0 | 2009.
en | Exploded View Figure 3.3 Ref 1 2 3 4 5 6 Small Size LCD/LED Monitors Rear Panel (UML-100-90, UML-102-90) Connector Audio In (for external audio) AV1 In AV1 Out AV2 In AV2 Out VGA In F.01U.134.499 | 1.0 | 2009.07 Ref 7 8 9 10 11 Connector S-Video In 12 VDC In Adjustable Stand Trigger Input RS-232 In (for firmware update) User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors 4 Description | en 21 Description The Bosch line of High Performance LCD/LED monitors are highly reliable display devices that combines the flexibility of signal connectivity and ease of operation. With the AV, Y/C (SVideo) and VGA terminals you can connect this monitor to a variety of devices like CCTV video cameras or a PC. The trigger signal input function allows you to implement the trigger warning mechanism easily with compatible CCTV video cameras.
en | Description 4.2 Model No. Small Size LCD/LED Monitors Power Rated Voltage Voltage Power at Rated Sync Format UML-080-90 120/230 VAC Range Voltage 100 to 240 V < 35 W NTSC/PAL 50/60 Hz UML-100-90 120/230 VAC 100 to 240 V < 35 W NTSC/PAL 50/60 Hz UML-082-90 120/230 VAC 100 to 240 V < 35 W NTSC/PAL 50/60 Hz UML-102-90 120/230 VAC 100 to 240 V < 35 W NTSC/PAL 50/60 Hz F.01U.134.499 | 1.0 | 2009.07 User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors 5 Installing the Monitor | en 23 Installing the Monitor This chapter outlines the procedures to install the UML-080-90, UML-100-90, UML-082-90 or the UML-102-90 Monitor. A qualified service person should install the monitor and adhere to all local codes. 5.1 Ventilation To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. 5.
en | Installing the Monitor 5.2.2 Small Size LCD/LED Monitors Wall Mount Installation This monitor can be wall-mounted using the square mounting holes (75 mm [2.95 in.] centers) and a suitable wall mount or swivel/tilt mount. Figure 5.2 5.3 Location of mounting holes Connecting the Composite Video Signal to the Monitor There are two (2) BNC connectors located on the rear side panel of the monitor for composite video inputs and two (2) BNC connectors for composite video outputs (see Figure 3.
Small Size LCD/LED Monitors Installing the Monitor | en 25 Up to three (3) monitors may be connected in this manner (see Figure 5.6). Note: To select between AV1 and AV2, press Input (see Figure 3.1, Item 2) located on the front of the monitor. 5.4 Connecting the Y/C (S-Video) Signal to the Monitor There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see Figure 3.2 and Figure 3.3) on the rear side panel. Note: Both Y and C inputs are terminated with 75 Ohm. 5.5 Figure 5.
en | Installing the Monitor 5.6 Small Size LCD/LED Monitors Connecting the PC Signal to the Monitor You can connect a PC signal to the monitor using the VGA connector on the rear panel and a VGA cable (D-SUB to D-SUB). Figure 5.4 Pin 1 2 3 4 5 Description Red Video Green Video Blue Video Ground Ground 5.7 Figure 5.
Small Size LCD/LED Monitors Installing the Monitor | en 27 Figure 5.6 Multiple Monitor Configuration Ref 1 2 3 Description Video Camera AV1 In AV1 Out Bosch Security Systems, Inc. User Manual F.01U.134.499 | 1.0 | 2009.
en | Navigating the Monitor Small Size LCD/LED Monitors 6 Navigating the Monitor 6.1 Navigating the Front Panel Use the front panel to make any necessary OSD adjustments to the UML-080-90, UML-100-90, UML-082-90 or the UML-102-90. See the figure below for an explanation of the front panel. Figure 6.1 Front Panel Buttons Ref. Button 1 Speaker 2 Input Description Generate sounds from the input audio signal. Selects the signal to be displayed. 3 4 Serves as the “Enter” function for OSD menus.
Small Size LCD/LED Monitors 6.2 Navigating the Monitor | en 29 Navigating the Monitor On-screen Display (OSD) The UML-080-90, UML-100-90, UML-082-90 and the UML-10290 have two (2) modes: Video and PC. The LCD is programmed through the on-screen display (OSD) menus and submenus where an operator can select operating parameters. To access the OSD menus, press the Menu button on the front panel. Use the front panel of the monitor to make any necessary adjustments to the OSD.
en | Navigating the Monitor 6.3 Small Size LCD/LED Monitors On-screen Display Menus There are three (3) on-screen menus that allow you to customize your settings. Press the Menu button to access the OSD menu. Icon Menu Custom Function Adjusts the Brightness, Contrast, Color, Tint and the Sharpness level for video performance. (The menu options differ between the Video and PC modes.) Picture/Sound Adjusts the Picture Mode, Color Tone, Mute, Volume, Size, Overscan, DNR and the PC settings.
Small Size LCD/LED Monitors Navigating the Monitor | en 31 Custom Brightness Contrast Color Tint Sharpness :Move :Input 50 50 50 50 50 :Menu Table 6.1 Custom Menu (Video Mode) Custom Brightness Contrast :Move :Input 50 50 :Menu Table 6.2 Custom Menu (PC Mode) Submenu Definition Brightness Adjusts the brightness level for video performance (range 0-100). Contrast Adjusts the contrast level for video performance (range 0-100).
en | Navigating the Monitor 6.5 Small Size LCD/LED Monitors Picture/Sound Menu To access the Picture / Sound menu, press the Menu button on the front panel of the monitor, then press the up and down buttons to select the Picture / Sound icon. Press the Input button to enter the menu, and then press the up and down buttons to select a submenu Picture/Sound Picture Mode Color Tone Mute Volume Size Overscan DNR 3D Comb :Move :Input Standard 6500°K Off 20 4:3 On On :Menu Table 6.
Small Size LCD/LED Monitors Navigating the Monitor | en Submenu Definition Picture Mode Selects the automatic picture control mode. Choices are: (Video Mode) Custom: User selected values of the Custom menu are applied. 33 Dynamic: Automatically adjusts the Brightness, Contrast, and Sharpness, maximizing the video quality in the picture. Standard: Applies factory default values. Picture Mode Selects the automatic picture control mode. Choices are Custom, High, (PC Mode) Middle and Low.
en | Navigating the Monitor 6.6 Small Size LCD/LED Monitors Setup Menu To access the Setup menu, press the Menu button on the front panel of the monitor, then press the up and down buttons to select the Setup icon. Press the Input button to enter the menu, and then press the up and down buttons to select a submenu. Setup Reset Language OSD Tone Blue Screen Key Lock Trigger Auto Switch Firmware Version :Move :Input English On Off Off X.X :Menu Table 6.
Small Size LCD/LED Monitors Trigger Navigating the Monitor | en 35 Enables or disables the Trigger function, and configures the trigger settings when enabled: Trigger Enable: Turns the Trigger function On of Off. Trigger Input: Selects the input signal source to display when a trigger signal is received. Buzzer: Turns the trigger buzzer tone On or Off. Trigger Time: Sets the time duration the trigger input (as set by the Trigger Input function) is displayed.
en | Power Management 7 Small Size LCD/LED Monitors Power Management These monitors feature a power management system to “power down” upon receipt of the display power management signaling (DPMS) from a DPMS video card. The DPMS-compliant video card performs this signaling by not sending a horizontal, vertical, or a sync signal. The monitor enters an appropriate mode through identifying each of the three (3) modes of the signaling system. 7.1 Power Consumption Mode ON STANDBY ACTIVE OFF 7.
Small Size LCD/LED Monitors 8 Troubleshooting | en 37 Troubleshooting Problem Solution No image displayed on screen – Check that the power cord of the monitor is securely connected into the wall outlet or grounded extension cable or strip. – Power switch should be in the ON position and the LED lit. – Check that the Brightness and/or Contrast adjustments of the display have not been turned down to minimum levels.
9 en | Maintenance Small Size LCD/LED Monitors Maintenance To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a soft lint-free cloth. Staining and discoloration may occur if left on the panel for long periods. If the surface (polarizer) of the LCD panel is dirty or stained, use absorbent cotton or a soft lint-free cloth to remove the residue as follows: 1. Turn off the display and disconnect it from the power supply. 2.
Small Size LCD/LED Monitors Technical Specifications | en 10 Technical Specifications 10.1 UML-080-90/UML-100-90 Model UML-080-90 UML-100-90 LCD Type 8.4 in. Digital LCD 10.4 in. Digital LCD Backlight Type CCFL CCFL Pixel Pitch (H x V) 0.213 x 0.213 mm 0.264 x 0.
en | Technical Specifications Small Size LCD/LED Monitors 10.2 UML-082-90/UML-102-90 Model UML-082-90 UML-102-90 LCD Type 8.4 in. Digital LCD 10.4 in. Digital LCD Backlight Type LED LED Pixel Pitch (H x V) 0.213 x 0.213 mm 0.264 x 0.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. Telephone +1 800-566-2283 Fax +1 800-366-1329 www.boschsecurity.com © Bosch Security Systems, Inc., 2009, Data subject to change.
