User's Manual

VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual
EN | 31
Bosch Security Systems | 2006-07 | V1.5 Configuration using a Web browser
Note
The screen display can differ from that shown above, depending on the
unit variants that you use.
If you do not connect, the device may have reached its maximum number of con-
nections. The maximum number of connections depends on the unit and net-
work configuration.
Protected unit
If the unit is password protected against unauthorized access, the Web browser
displays a message to that effect and prompts you to enter the password when
you call up access-protected areas.
Note
The unit offers the option of limiting access across various authorization
levels (see pages 48 and 65).
– Enter the user name and associated password in the corresponding text fields.
– Click OK. If the password is entered correctly, the Web browser displays the
page that was called up.
Choosing the configuration mode
There are two options for configuring the unit or checking the current settings:
❚ the unit overview or
❚ the configuration menu.
All settings are stored in the unit's memory so that they are retained even if the
power supply is interrupted.
Unit overview
The unit overview shows the most important parameters summarized into six
groups. This overview allows you to change the basic settings with just a few
clicks and entries.