FMM-7045, FMM-7045-D Installation Instructions EN Multiplex Addressable Manual Pull Stations
FMM-7045, FMM-7045-D | Installation Instructions | 1.0 Description 1.0 Description These instructions cover the installation of Bosch FMM-7045 (Single Action)/FMM-7045-D (Dual Action) Multiplex (single-action) Multiplex Addressable Pull Station in a fire system supervised by a Bosch D7024 Series or DS9400 Series Fire Alarm Control Panel (FACP) with firmware revision 2.0 or greater and a D7039 or DS9431 Multiplex Expansion Module.
FMM-7045, FMM-7045-D | Installation Instructions | 3.0 Specifications . 2.3 Wiring 2.4 Make sure all power is removed before making any electrical connections. Failure to do so may result in personal injury and/or damage to equipment. Run all wires and make all connections before mounting the FMM-7045/FMM-7045-D. All wiring is supervised and power limited. See Figure 2 for details. Do not loop wire around each terminal. Break terminal wire connections for supervision.
Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450-9199 Customer Service: (800) 289-0096 Technical Support: (888) 886-6189 © 2006 Bosch Security Systems, Inc.
