User's Manual

The following window appears:
Specifying the overview camera
For AVS Camera 1 is always reserved for the overview. For DCC the high-
est pre-position is reserved for the overview. The overview gives a general
overview of the conference venue when all the microphones are off (and
therefore no conference participant is on camera). In case of AVS the
overview camera can also be used when a dome camera is moving from one
preposition to another. It acts as the default camera, and is activated when
no other camera is selected by the Allegiant video switcher in response to
conference activity.
The overview camera can be either a fixed or dome camera. However, in
single-camera configurations, the overview camera is always a dome camera
with its last preposition showing the overview.
NOTE: When a dome camera is used as the overview camera, the ‘Cam-
era movement time’ option is disabled.
If a fixed camera is used, the edit fields for seat (or unit) number and text
are not displayed. It is not possible to assign this camera to a seat or unit.
The following screen text is displayed:
‘This camera is reserved for the overview’
USING DCN AUTOMATIC CAMERA CONTROL
DCN Automatic Camera Control Digital Congress Network
Software User Manual Page 3-6
3
Fig. 6 The Camera Installation window