Operation Guide

10 en | Start-up and configuration Bosch Video Client
F.01U.247.166 | v1.2 | 2011.06 Operator’s manual Bosch Security Systems
4. Network
Select Use DHCP if all devices support DHCP and you want to assign IP addresses
automatically.
Alternatively, enter an IP address range. This range must provide sufficient IP addresses
for all the devices to be configured.
5. Date and Time
Select whether the date and time are to be taken from the settings on your PC or from an
SNTP server. If necessary, reset the system time and date on your PC or enter the IP
address of an SNTP server.
6. Video Quality
Use the slider to select the quality of the video for all devices. The relevant settings for
each device are made automatically. Set a bandwidth limit if required.
7. Recording
Create a uniform recording scheduler for all devices. Define three recording profiles
(Day, Night and Weekend) by selecting a recording mode (Continuous, Motion or Off)
and setting the quality slider. Fill the weekly recording calendar with these profiles. If no
recordings are to be scheduled, you must select Off mode for every recording profile.
8. Summary
A summary of the selected settings is displayed. If you want to change the settings, click
< Back to go back step by step in the wizard.
Click Apply to configure the devices according to the selected settings; click Cancel to
cancel the wizard.