Operation Guide

12 en | Start-up and configuration Bosch Video Client
F.01U.247.166 | v1.2 | 2011.06 Operator’s manual Bosch Security Systems
Camera Access
Digital input access, Relay access
Selecting application paths and logging
1. Select the Application tab of the Application group.
2. Select the path to the folder to which Video Client will export manual recordings. If you
do not enter anything here, the following default setting is used: %current user%\My
Documents\Bosch\VideoClient\Recording.
Define the maximum hard disk space in GB to be used for manual recordings. If you do
not enter anything, 10 is used.
3. Select the path to the folder in which the logs are to be saved. If no entry is made, no
user actions can be logged.
Select if user actions are to be logged.
4. Select the Intuikey communication port.
Licenses
On the Licenses tab of the Application group you can find information on the licensing of
camera channels in the Bosch Video Client. A Bosch Video Client installation has 16 camera
channels as standard. You can enable additional channels by purchasing a license.
The host ID displayed here is needed to install a license for additional camera channels. The
number of enabled camera channels is shown. Click Add License... to open a dialog box for
the installation of additional licenses.
PTZ configuration The user can configure the PTZ settings
PTZ control The user can control the camera
View only The user can watch videos
Access denied The user has no access to the camera
Control allowed The user can control the component
View only The user can see the component
Access denied The user has no access to the component