Operation Guide
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Start-up and configuration
- 3 Live window overview
- 4 Viewing live images
- 5 Setting up favorite views
- 6 Live recording
- 7 Saving snapshots
- 8 Instant playback
- 9 Monitor wall
- 10 Controlling cameras
- 11 Playback window
- 12 Searching for events
- 13 IVA search
- 14 Searching for text
- 15 Command line start
30 en | Saving snapshots Bosch Video Client
F.01U.247.166 | v1.2 | 2011.06 Operator’s manual Bosch Security Systems
7 Saving snapshots
7.1 Capturing a still image
Capture still images from a camera and save them to the PC hard disk in a bitmap format.
To save a still image to the PC hard disk:
1. Click a cameo to select a particular camera.
2. Click the image capture tab .
– The image capture pane opens with the still image displayed.
3. To change the default location, click the drop-down arrow to select a different path on
your PC.
4. To change the file name, type the new name for the file.
5. Click to save the image.
6. Click to capture a new still image from the currently active cameo.
The snapshot video image has the same resolution as the camera image. Identification
information is shown under the image.
To close the image capture pane, click the image capture tab .