Operation Guide

Bosch Video Client Controlling cameras | en 35
Bosch Security Systems Operator’s manual F.01U.247.166 | v1.2 | 2011.06
Moving a camera to a pre-position
To move the active camera to a pre-position:
1. Enter a pre-position number using the keyboard.
2. Click Shot (or press enter).
Click buttons one to six for immediate positioning to one of the first six pre-positions.
To store the current position of the camera in a pre-position:
1. Position the camera.
2. Enter a pre-position number.
3. Click Set.
Aux functions
Aux commands are special commands for controlling cameras. To switch on the Aux
command:
1. Enter an Aux number.
2. Click Aux On (or press enter).
3. To switch off the Aux command, click Off.