Operation Guide

Bosch Video Client Playback window | en 39
Bosch Security Systems Operator’s manual F.01U.247.166 | v1.2 | 2011.06
11.3 Timeline
Click the timeline tab to view the timeline.
A timeline with the recordings of the displayed cameras is shown with all camera tracks
synchronized to the same playback time.
Figure 11.3 Timeline
The timeline shows the recorded sequence in light blue, motion recording in yellow, contact
recording in red and text recording in orange.
To change the timeline scale:
 Click the + or – box to adjust the timeline scale.
– 3 minutes, 5 minutes, 15 minutes, 1 hour, 3 hours, 6 hours, 12 hours, 1 day, 2 days,
1 week, 2 weeks, 1 month, All.
To zoom in on a smaller section of the timeline, select a shorter time period.
 Place the pointer on the timeline scale and rotate the mouse wheel to change the
timeline scale.
 Use the arrows above the timeline or drag the timeline scale to move back and forward in
time.
To navigate in the timeline:
 Click somewhere in the timeline.
The images of the selected point in time are displayed.
Or:
 In the date and time field, enter the required values.
The hairline jumps to this time. The images of this point in time are displayed in the
Image window. Use a timeline controls for the required playing option.
To select a time period:
You can select a time period in the timeline using the hairline. You can use this selection for
further tasks such as exporting video data.
 Drag the bottom arrow handles of the hairline to select a time period.
Drag the left or right edge of the selection to change the size of the selection.
Drag the bottom of this selection to move the selection.
 Right-click the selection and click Clear selection to remove the selection and display the
single hairline again.
To check the authenticity of an export video clip selection:
 Select a time period in the timeline, right-click this selection and click Check .
The authenticity is checked and an appropriate message box opens.