Operation Guide
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Start-up and configuration
- 3 Live window overview
- 4 Viewing live images
- 5 Setting up favorite views
- 6 Live recording
- 7 Saving snapshots
- 8 Instant playback
- 9 Monitor wall
- 10 Controlling cameras
- 11 Playback window
- 12 Searching for events
- 13 IVA search
- 14 Searching for text
- 15 Command line start
44 en | Searching for events Bosch Video Client
F.01U.247.166 | v1.2 | 2011.06 Operator’s manual Bosch Security Systems
12 Searching for events
Click the event search tab of the playback window to set up a search filter for events.
12.1 Event search pane
Figure 12.1 Playback window - Event search pane
12.1.1 Setting the search period
Enter the date and time in the From and To boxes to define the period to search:
–The To box shows the time and date of the latest (newest) recording and the From box
the earliest (oldest) recording by default.
12.1.2 Track selection
Check a camera selection box to mark those cameras to be included in the search.
Only the assigned cameras are listed here. If a camera is assigned multiple times in your
displayed view, only one entry for this camera is listed.
12.1.3 Event filter
Specify the type of event to search for:
– Contact: recorded video for contact events for the selected tracks is searched for within
the defined period.
– Motion: recorded video for motion events for the selected tracks is searched for within
the defined period.