Operation Guide

Bosch Video Client Start-up and configuration | en 11
Bosch Security Systems Operator’s manual F.01U.247.166 | v1.2 | 2011.06
2.4 Configuration Manager
When the wizard finishes, the Configuration Manager opens.
1. Click the System tab.
2. Under Applications, click Video Client.
This is where you can change the default settings for the Bosch Video Client.
2.4.1 Video Client
Use the following menus are configure the Bosch Video Client:
1. In the User Management menu, set user accounts, user passwords, and access rights if
required.
2. In the Cameras menu, verify that the correct cameras are selected and that they are in
the correct order, and assign access rights.
3. In the Digital Inputs menu, verify that the correct inputs are selected and that they are in
the correct order, and assign access rights.
4. In the Relays menu, verify that the correct relays are selected and that they are in the
correct order, and assign access rights.
5. In the Applications menu, set the storage paths for the Bosch Video Client and manage
licenses.
Implementing User Administration
If you define a password for administrator, this will have to be entered every time the
database is opened.
To create users and define user rights:
1. Select the User Management group.
2. To create an additional user, click Add....
A dialog box appears.
3. Enter the user name and password.
4. To define individual user rights, select the relevant entry in the list of created users and
activate or deactivate the required options under Rights:
5. To remove a user, select an entry in the list of created users and click Remove.
Selecting components and assigning rights
1. Select the Order tab under either the Cameras, Digital Inputs or Relays group.
2. Check those components you want listed in Video Client.
The sort order of these lists matches that in Video Client.
3. Click the Top, Up, Down and End buttons to change the position of a selected
component within the list.
1. Select the Access tab under either the Cameras, Digital Inputs or Relays group.
Each user is assigned the highest authorization level by default.
2. To change a user's access rights, left-click the relevant table cell until the desired
authorization level is selected.
3. To assign a user the same authorization level for all components, or vice versa, right-click
the relevant column or row header and select the desired authorization level.