Operation Guide
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Start-up and configuration
- 3 Live window overview
- 4 Viewing live images
- 5 Setting up favorite views
- 6 Live recording
- 7 Saving snapshots
- 8 Instant playback
- 9 Monitor wall
- 10 Controlling cameras
- 11 Playback window
- 12 Searching for events
- 13 IVA search
- 14 Searching for text
- 15 Command line start
Bosch Video Client Start-up and configuration | en 13
Bosch Security Systems Operator’s manual F.01U.247.166 | v1.2 | 2011.06
2.4.2 Installing licenses
Follow these steps to install a license for the Bosch Video Client:
1. Order a license - you will receive an authorization code.
2. Go to the Licenses tab of the configuration manager to determine the host ID of your
computer.
3. Log on to the Bosch license manager (https://activation.boschsecurity.com/) using your
authorization code.
4. Fill-in and submit the license activation data (including your host ID).
5. Enter an e-mail address to receive the activation code.
6. Save the license key file from the received e-mail to your hard disk.
7. Go to the Licenses tab of the configuration manager and click Add License...
8. Navigate to the license key file on your hard disk and click Open.
9. Check that the license has been activated.
10. Save your configuration and restart BVC.
2.4.3 Saving the configuration
When finished:
1. Click to save the configuration.
2. Close the Configuration Manager