Operation Guide
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Start-up and configuration
- 3 Live window overview
- 4 Viewing live images
- 5 Setting up favorite views
- 6 Live recording
- 7 Saving snapshots
- 8 Instant playback
- 9 Monitor wall
- 10 Controlling cameras
- 11 Playback window
- 12 Searching for events
- 13 IVA search
- 14 Searching for text
- 15 Command line start
18 en | Live window overview Bosch Video Client
F.01U.247.166 | v1.2 | 2011.06 Operator’s manual Bosch Security Systems
3.2.2 Setting user preferences
To change the user preferences for the application, click to open a dialog box:
Settings tab:
1. Place a check mark next to the items to be activated.
– The computer beeps on the specified alarms or maximizes the application window.
2. Select a sequence dwell time between 5 and 60 seconds to determine how long a
sequenced view remains displayed.
3. Select an instant playback time offset between 5 and 120 seconds.
Directories tab:
1. Enter the locations that will be monitored for exported recordings.
2. Enter the locations that will be monitored for exported snapshots.
Monitor wall tab:
1. Drag the available monitors to a position on the monitor wall graphic.
2. Alternatively, use the arrows to place or remove the monitors.
Click OK to save changes and close or Cancel to close the window without change.
Note:
These settings are saved for the user who is logged on and are applied each time this user
logs on with the same computer.